Search the Community
Showing results for tags 'usb soundcard'.
Found 1 result
Greetings folks, I am ready to step into the world of DRC and this is my first foray into anything that require measurements. I am looking at either of a Behringer ecm8000 or the umik-1 usb and plan to follow the steps described here: Creating a DRC Room Correction Filter for your Squeezebox. Basic steps involve measuring L speaker with mic with R line-out from amp into R channel input of soundcard/mixer for the reference channel, then swapping L and R mic/card. I looked up the behringer 302usb and 502usb and it looks to be the most convenient. But I dont know how to use it. I've never used any kind of recording gear before and wondering where to plug the mic and rca-out of amp on it. The mixer has a dedicated mic input socket and separate L+R input pairs. So do I plug in the mic into the mic socket and the rca-out from amp into the R-in of one inputs? Or do I plug the mic into the L input and the rca-out of amp into the R input? Also do you have any recommendations for any other mixer/soundcard hardware that is external and will work with linux without drivers (or has linux drivers for ubuntu)? The whole investment is going to be a one time usage only (or every time I move house once in a few years). Once I am done with it after a week of fiddling with generating FIR files it will stowed away, so I need something cheap that will not auto-sample and allow L+R inputs separately for measurements. If I buy the umik-1 or any usb based mic, I dont know how I will input the other reference channel from Amp, unless there is a cheap external usb box that will work with one usb on mic and another on the usb soundcard. (I hope arecord or Audacity will work with two usb inputs for recording)? Thanks for all your advise. G0bble