Search the Community
Showing results for tags 'mcintosh'.
Found 4 results
Hello, I just added a new McIntosh d1100 to my system. Generally speaking, it works great, but there are a few quirky things that I was hoping I could get some help with. My setup: Roon core runs on a dedicated Ubuntu Linux VM. I have Roon endpoint on a few Macbook’s, my iPad and my iPhone. I have a Raspberry Pi 2b with the latest build of dietpi on it, and Roon Bridge installed. I then utilize the USB to connect to the McIntosh d1100. Everything is running the latest builds of Roon. DSD over PCM (DoP) is my DSD strategy. Raspberry Pi and Roon Core is hard wired 1Gbps Ethernet My issues: Pretty much in summary the "fade-in" issue described in part 1 of the d1100 review posted here at computer audiophile Whenever I play an album, there is this weird thing where I miss the first bit of the first track. How much I miss seems to depend on source. For 16/44 CD quality, it is the first fraction of a second. For DSD it could be 2-3 seconds. In Roon, you can see the file playing the first few seconds, but the DAC does not lock and start outputting sound until between about 0.5s to 3s later, depending on source.For example, when playing The Beatles Please Please Me album, starting with “I saw her standing there”, you don’t hear the first part of Paul’s count in. When kicking off “A Hard Day’s Night”, you miss the first part of that epic first chord. This seems to happen regardless of what the source is (PCM, DSD, Various sample rates) and on every album There is an intermittent issue with losing lock between tracks of an album. What happens is that at the end of one track of the album, typically during silence or low output parts during the last 3-5 seconds of the track, the DAC loses lock. Roon will still show the track playing. Then, Roon will move to the next track, the DAC regains lock and away it goes. It’s like a little “blip”. Sometimes, I end up missing just the first split second of the next track. This doesn’t happen between ALL tracks, or even between the same two tracks consistently. The issue seems to happen more frequently with DSD or high resolution PCM. Sometimes, other than missing the first second or so of the first track, the album plays fine, with the DAC consistently keeping lock track to track. Other times, the DAC continually loses lock when one track ends, and locks back on for the start of the next track. Other times, it will lose lock after one track, then lock on for the next track, but I miss the first half second or so of the next track. This happens, but not all the time, and not between every track on an album. Very inconsistent. I have tried playing with difference resync timer values, anywhere from 0.1s to 1s to 2s to even 5s just to see what would happen, as well as trying 250ms buffer to no avail. I also tried plugging my MacBook Air running Roon endpoint directly into the DAC, and experience the same problems. I think what I am hitting is a result of how McIntosh implemented the firmware on their d1100. McIntosh’ solution will likely be “use JRiver”, as they have a setting to add 2 seconds of silence between tracks that seemingly fixes this. I don’t want to use JRiver though… Anything I can do or any ideas other than pray for future firmware that addresses this? It sounds GREAT, but losing the first few seconds of every album and the inconsistent inter-track behavior is really taking away from the album experience. Thank You
Hello all, May I please ask for some assistance in automating turning on the MC7205 when I turn on my HTPC. I built a powerful HTPC and I use Kodi as my media player. The HTPC is used as a preamp and as a media player I is equipped with M-audio 1010lt sound card to which is connected the MC7205 and to my record player . The Amp is then connected to my speakers. The objective is to voice activate the HTPC and automatically ask Kodi to play something, when this command is given, and the amplifier is turn off, the HTPC would turn on the MC7205 and then play what is requested. If the Amp is already turned on the no issues. According to McIntosh support , I should be able to put the Amp on a remote setting and connect HTPC to the MC7205 via a USB cable from the HTPC to the remote port on the amp. The output of the USB port is 5V.According to McIntosh literature and support it should be enough to "activate" turn on the Amp. Since electrical power is expensive here, I would like to avoid keeping the amp always on. My issues I have are: 1) when I turn on the HTPC I get a (what I call a power surge) a high signal impulse trough the speakers and similarly when the HTPC is shut down before the amp I get another spike via the speakers. How to I avoid this? 2) It seems to me that keeping the Mc7205 on remote still uses 1000w of power. Am I correct to assume that this is normal or does my amp have a problem? Thank you in advance for any assistance on this subject
I subscribe to Tidal Hifi and have access to Masters encoded with MQA. My computer is connected to my McIntosh MHA100 through USB and I am using eihter Amarra Symphony or Audirvana Plus (with Tidal) + Itunes. My understanding is that Tidal by itself connected through my McIntosh will not deliver the full MQA experience and need an MQA compatible DAC. So I was told Buesound Node 2 would happen to do just that. My issue with this set-up is that the Burr Brown Chip on this 599$ (CDN) is not at the level of the DAC built in my McIntosh. Would I, at the end of the day ended up with worse quality music than feeding it with the USB cable and using my McIntosh DAC while not having the full MQA experience. Second part of this: The Audirvana Plus has MQA capability, does this solve my issues and would I get the full MQA experience? I want to integrate Blusesound in order to remove Airplay from my system because it can't stream 24 bit while bluesound could. Hope I make sense here as this is my first post. Thanks Saby
Hello, I have a MA8000 and I am trying to use J River to play music through my computer. I am connected to the amp with the proper USB cable and I have installed the McIntosh USB driver. I configured the settings exactly as specified on the McIntosh website. However, when attempting playback I only get five minutes through a song before audio stops and a message pops up, "ASIO Driver stopped unexpectedly." Much of the time I don't even get 30 seconds before the "ASIO Driver stopped unexpectedly". Sometimes when I connect the amp to the computer and turn them both on, they will connect and disconnect rapidly. If anyone can offer advice, let alone a solution, I'd be eternally grateful. Thank you. - Max