Search the Community
Showing results for tags 'digione player'.
-
I've been looking for a high value Roon endpoint for my Dynaudio Focus XD 200 active speakers. Decided to give the Allo a try and ordered one last Thursday 3/1. It shipped from Bangalore IN and arrived at my doorstep today. From opening the box to listening to music took me about 15 minutes. Easy setup with the Allo/Dietpi GUI interface. All you need is a modicum of networking knowledge and a web browser, voila. The Dynaudio's are configured for direct two cable playback master/slave. The Digione is connected to the Dynaudio with a Blue Jeans Coax SPDIF RCA/BNC cable. Playing a bit perfect FLAC 192/24 file sounds pretty darn fine. I'm impressed, particularly for such a high value component, it won't win any beauty contests but sounds very good. I was previously feeding the Dynaudio's wirelessly using the Dynaudio connect USB port fed by the SOTM SMS200. Direct connect wasn't possible with the SOTM because of the USB only output. I'm very, very pleased so far. Prior to the Dynaudio's my configuration was SOTM SMS200 > Ayre QB9 DSD DAC > Ayre AX7E amp > Focal 1007BE. I'm liking the current config significantly better, less audiophile hardware in my media room and a highly flexible great sounding system. Current config is Allo Digione > Dynaudio Focus XD 200. Two boxes, love it.
- 9 replies
-
- allo
- digione player
-
(and 4 more)
Tagged with:
-
I have a raspberryPi 3+ with a DigiOne board installed. The boot image is DietPi with Allo GUI. It has been updated to the latest build v6.22.3. The DigiOne sound card has been selected. It has an IP address and can initiate the GUI via its IP through the web browser. I can also ssh into it using the IP address I can successfully ping it. Roon Bridge is installed and active. It's connected to the network via ethernet and to my DAC via S/PDIF. Despite all of this it doesn’t appear in Roon and I get no indication of any digital data passing through to my DAC. I’ve included the results of the “aplay — list devices” command which appears to show the DigiOne sound card enabled At this point I'm stumped and wondering if there’s something obvious that I’m missing. Perhaps there’s a hardware issue involved? Any thoughts are appreciated.
-
Hi, New member here, hoping for some help. I have a DigiOne player (RPI3b+ & DigiOne), powered by the standard RPI wallwart PSU, connected to the DAC in an Audiolab 8200CD, which is connected to my hifi amp. The Audiolab DAC is capable of playing 24 bit 96 kHz files, via USB input or via SPDIF coax but I can't find any way to get the RPI/DigiOne to output sound higher than 16 bit 44.1kHz. I don't have another SPDIF source capable of outputting hi res files but I have used a windows 10 laptop via USB connection to achieve 24 bit 96kHz (which I can see via the DAC's display). I had to change windows sound settings to output at the correct quality but it works. I started using the SPDIF output on the DigiOne (as that's what it's there for), using Volumio. I signed up to a trial of Tidal and MyVolumio and tried using the native Tidal support in Volumio. I am playing Master Quality files but they are only showing as 16 bit 44.1kHz on the DAC. I then tried outputting the sound directly to the DAC via USB from the RPI (as I know I can get 96kHz from my laptop) but that didn't work either. As far as I can tell, I've been through all the settings in Volumio and can't seem to fix this. I also tried streaming Tidal to Moode using BubbleUPNP from an android phone but again, can't get above 16 bit and 44.1kHz. I'm new to streaming in this way but work in IT and reasonably technically minded. Really scratching my head on this though, any help much appreciated. Thanks!
- 6 replies
-
- digione player
- hires
-
(and 5 more)
Tagged with:
-
I have a DigiOne player with Volumio. I've had it for about 2 weeks. It is connected to my router with an ethernet cable. I am using Audirvana+ for Windows to send audio to it. I shutdown my laptop every evening. The past 2 mornings, the player has disappeared from Audirvana's option for output. I had to reboot the DigiOne player (once yesterday, multiple times today) in order to get it to reappear. I still can't reach the Volumio interface through volumio.local (this worked when I first connected it to my network). Why does it keep disappearing? I love the player, but this will get old fast if I have to keep rebooting it.
-
- digione player
- volumio
-
(and 1 more)
Tagged with: