Search the Community
Showing results for tags 'auralic aries'.
Found 4 results
Wind-in-Web posted a topic in Networking, Networked Audio, and StreamingAre there members which use docking stations with SSD/HDD with digital transports at the forum? I use an Age Star docking station with SSD. The station is powered by SBooster (9v) and connected to Auralic Aries (femto one) by WireWorld Starlight. The sound is much better than with the same SSD powered from the Aries's USB port... The Aries connected to my DAC with an AQ Eagle Eye cable. I've some questions... 1. Does it make sense to use better USB cable than WW Starlight to connect the docking station (with SSD or HDD) to the Aries? 2. Does it make sense to use a USB isolator between the docking station and the Aries? 3. Are there some docking stations which could be better for audio than the Age Star? I've searched Internet for a few days by the moment but I wasn't able to find information concerned the questions...
SBOOSTER "BEST OF TWO WORLDS" AUDIOPHILE POWER SUPPLY (BOTW P&P ECO) The Sbooster “Best of Two Worlds Power & Precision ECO” audio upgrade (BOTW P&P ECO) is the successor of SBooster's “Best of Two Worlds Solutions” audio upgrade (BOTWS). This new upgrade product combines power, precision and efficiency in an unique innovative manner that purifies the incoming current immediately upon entering the device. A dual stage mains filter and an earth line choke clean the current from high frequency pollution before the current reaches the transformer. The transformer is a custom-made audio grade transformer with electrostatic shielding. The electronic design allows for up to 50% more output out of the used electronics and consumes even up to 35% less energy than a conventional design. Even though it provides a significant boost in available power, the BOTW P&P ECO audiophile power supply is so efficient that it consumers only a fraction more of electricity than what a standard power does. ULTRA ACCESSORY The Sbooster Ultra Filter Accessory can be used as an addition to the many filtering and optimization techniques of the BOTW P&P ECO audiophile PSU and can only be used with the SBooster split-current module of the BOTW P&P ECO. The Ultra is based on active filter technique, which reduces the ripple & noise of the BOTW P&P ECO even further: to a negligible low level. The Ultra is designed for audio equipment that is highly sensitive to residual noise, such as digital to analog converters, music streamers, USB to SPDIF converters, headphone-, pre- and phono amplifiers. In addition to the active filter function, the Sbooster Ultra also re-stabilizes the output voltage to the correct voltage and because of the short cable length of the Sbooster Ultra, the highly purified powered is passed to your audio device with no performance loss . Main benefits of BOTW and Ultra Filter Accessory: Up to 50% more power to your amplification components Lower noise floor and blacker backgrounds to your digital components Improved musical rhythm and timing These products qualify for Free Shipping and 5% back in points when you register for Club Ciamara Membership Rewards Program 1.844.CIAMARA (1.844.242.6272) High End Audio Store NYC - Experience Ciamara
I can't believe the amount of pages on this site on the Auralic Aries and its software and continual updates. I do like to read about computer audio, but this seems insurmountable. My questions are basic: Will I be able to play all audio from my laptop wirelessly through this streamer? That is, can I play system sounds, J.River Media Center, internet videos and iTunes without audio lagging behind video? Will it be as simple as now when a USB connection lets my Benchmark DAC1 PRE play anything without any fuzz? Will I need major changes and/or additional investments to make the Auralic Aries work? The details of my system: I have a Windows 7 laptop connected to a Benchmark DAC1 PRE via USB. The reason I intend to change this reliable and simple setup is that I plan to go digital all the way to my loudspeakers. Soon, my new Genelec 8351A digital studio monitors will arrive. They accept analogue input, but analogue signals are converted to digital inside the speaker in order to make use of digital filtering and an elaborate digital room correction system. It seems “anti-audiophile” to let my signal be converted back and forth two times between analogue and digital. Genelec 8351As only accept digital input in the form of AES/EBU, which my Benchmark DAC can’t provide. (I don’t play esoteric hi-def files, I do like to have a volume control outside my PC so as not to accidentally blast my system – and ear drums – if there is a computer mishap. I’d love to get rid of that USB connection and go wireless, I don’t have an iPad, and my phone is Android.) Auralic Aries seems to be the way to go in my situation. But am I missing something in the 100s of pages on this product? Thank you, in advance
Hi folks, Firstly, wishing everyone here a very Happy New Year's Eve tonight! I've only recently started posting here, and am really grateful for the expert advice so far. This new "problem" is one that's been bugging me for a while, and I'm sure I'm missing a simple solution! THE BACKGROUND I currently have my main "Hifi" (Macbook/Audirvana/Hugo/Amp/Speakers) setup in my Living Room, have my music housed on my home server (Mac Mini/RAID) in my Study Room, and sometimes also listen to music at my Home Theater setup (Mac Mini/Plex or iTunes/Bose LifeStyle 535), which also serves to pipe music throughout my home in ceiling speakers. Everything is connected via Gigabit Ethernet. My home theater setup is a simple one, just a TV and a Bose LifeStyle 535 V35 receiver connected to both a local 5.1 surround sound speaker set and also to my home-wide speakers (ceiling speakers). In addition to the Mac Mini running Plex or iTunes mentioned above, sources for this also include my Blu-Ray player, Cable TV, Satellite TV, etc, and a: Toslink Optical from an Airport Express, which in turn gets its input from my main Hifi setup in my Living Room via AirPlay from Audirvana Plus 2.0 (in standalone mode). THE ISSUES The music coming through my home-wide speakers via the above last setup (Living Room Hifi Audirvana -> Airplay -> Ethernet -> Airport Express -> Toslink Optical -> Bose V35 Receiver -> Homewide amps and speakers) is pretty crappy at the moment (very muddy across the entire range). Just to be clear, I control the music via the Living Room Hifi Audirvana, i.e., I set the Bose V35 Receiver to channel the Airport Express source in "passive mode" (that is to say I turn the Bose on, set the source, and then go back to the Living Room). While the Bose V35 and the home speakers aren't fantastic by any means, the "normal" quality (e.g. from the local sources - Blu-Ray or even the local Mac Mini running Plex/iTunes) is still much better than what I am getting from the above path from my main Hifi. POSSIBLE CAUSES 1. Lack of a discrete DAC in the above path? 2. Downsampling by AirPlay/Airport Express of all files to 44/16? 3. Ethernet cabling quality (the contractor was supposed to have used Cat 6 GigE cabling but I haven't been able to verify...)? POTENTIAL SOLUTIONS CONSIDERED 1. At the Home Theater setup: Insert a DAC between the Airport Express and the Bose Receiver - But will not fix the AirPlay/Airport Express downsampling issue. 2. At the Living Room Hifi setup: change the source of the music going to the Home Theater, from Audirvana/Airplay, to Audirvana/USD/DAC (I'm currently using a Hugo) - But how to get the signal from the Hugo to the Home Theater system? 3. At the Home Theater setup: Get something like an Auralic Aries, with input via Ethernet and output via Toslink optical to the Bose Receiver - But from what I understand, I won't be able to simply "play" my music from the Living Room Hifi Macbook/Audirvana (where I have all my playlists etc set up, and control via Parallels on my iPad), i.e., I am guessing that the Aries would only allow me to control it via its own specialized (Lightning) App, to connect to music on my Study Room/Mac Mini/RAID. Or am I mistaken here? Can the Aries be set up to simply act as a passive conduit between my Living Room/Macbook/Audirvana and the Home Theater/Bose Receiver - in essence an "upgrade" to my existing Airport Express/Airplay connection? YOUR ADVICE REQUESTED My apologies for the long question! However I would really appreciate any advice, as to which of the above 3 solutions would be best - or if there is another fix that I haven't considered! Many, many thanks in advance! Art ____________________________________________ SETUP DETAILS Study Room (Home Server Setup) LaCie 5big Thunderbolt 2 RAID -> 2014 Mac Mini 8GB RAM OS X Server (Music Files stored here) -> Gigabit Ethernet -> Cisco Switch Living Room (Main Hifi Setup) Cisco Switch -> Gigabit Ethernet -> 2014 Macbook Air 13" 8GB RAM -> Audirvana Plus 2.0 in standalone mode -> a) Hugo -> Woo Audio WA5 SET Class A -> Audeze LCD-XC / KEF Speakers b) Airplay -> Gigabit Ethernet Home Theater TV and Bose LifeStyle 535 Receiver, with inputs from: a) Gigabit Ethernet -> Airplay -> Airport Express -> Toslink optical b) 2014 Mac Mini 8GB RAM -> iTunes / Plex c) Blu-Ray / Satellite / Cable etc The Bose Receive outputs through local 5.1 surround speakers and also to the home-wide speakers. NOTES - All Macs running OS X 10.10.1 (Yosemite). - Assume I can't run RCA cables from my Main Hifi system DAC to the Home Theater (2 rooms away).