PaulZH Posted October 2, 2018 Share Posted October 2, 2018 Dear, Just received today the USBridge. The bridge worked initially without any problem. Since I saw that the installed DietPi version was rather old, I did an update via the command line dietpi-update command. This took some time since there are many interim versions. I saw no special errors during the update process. At the end the instruction was given to issue the reboot command. After reboot I'm confronted with following situation. A network scanner finds the device, but when one asks for the open ports they appear/disappear constantly. When trying to connect on port 80, I get "problem loading page". I sometimes am able to connect via ssh, but this connection is immediately closed by the remote host as shown below. The device as expected is not appearing in roon either. Do you have a suggestion what to do? @allo.com Or is it better to post the issue at the dietpi forum @Dan_Knight? I'm afraid I need to reinstall the image on EMMC. I found the related documentation. But it isn't clear to me (probably very trivial) how to get the EMMC out of the case. I have a DigiOne with microSSD, and there it is easy to get the card out. But for the USBridge I don't see it without opening the case. No link available to a video? DietPi Team : Daniel Knight (founder), MichaIng, K-Plan Web : https://DietPi.com | https://twitter.com/dietpi_ Patreon Legends : PINE64 community Donate : https://DietPi.com/#donate DietPi Hosting : Powered by https://MyVirtualServer.com ─────────────────────────────────────── DietPi | 11:16 | Tue 02/10/18 ─────────────────────────────────────── v6.16 | Sparky SBC (armv7l) ─────────────────────────────────────── eth0 | 192.168.254.163 ─────────────────────────────────────── DietPi Team : Daniel Knight (founder), MichaIng, K-Plan Web : https://DietPi.com | https://twitter.com/dietpi_ Patreon Legends : PINE64 community Donate : https://DietPi.com/#donate DietPi Hosting : Powered by https://MyVirtualServer.com dietpi-launcher = All the DietPi programs in one place. dietpi-config = Feature rich configuration tool for your device. dietpi-software = Select optimized software for installation. htop = Resource monitor. cpu = Shows CPU information and stats. root@DietPi:~# Connection to 192.168.254.163 closed by remote host. Connection to 192.168.254.163 closed. Link to comment
ALLOsupport Posted October 2, 2018 Share Posted October 2, 2018 3 hours ago, PaulZH said: Dear, Just received today the USBridge. The bridge worked initially without any problem. Since I saw that the installed DietPi version was rather old, I did an update via the command line dietpi-update command. This took some time since there are many interim versions. I saw no special errors during the update process. At the end the instruction was given to issue the reboot command. After reboot I'm confronted with following situation. A network scanner finds the device, but when one asks for the open ports they appear/disappear constantly. When trying to connect on port 80, I get "problem loading page". I sometimes am able to connect via ssh, but this connection is immediately closed by the remote host as shown below. The device as expected is not appearing in roon either. Do you have a suggestion what to do? @allo.com Or is it better to post the issue at the dietpi forum @Dan_Knight? I'm afraid I need to reinstall the image on EMMC. I found the related documentation. But it isn't clear to me (probably very trivial) how to get the EMMC out of the case. I have a DigiOne with microSSD, and there it is easy to get the card out. But for the USBridge I don't see it without opening the case. No link available to a video? DietPi Team : Daniel Knight (founder), MichaIng, K-Plan Web : https://DietPi.com | https://twitter.com/dietpi_ Patreon Legends : PINE64 community Donate : https://DietPi.com/#donate DietPi Hosting : Powered by https://MyVirtualServer.com ─────────────────────────────────────── DietPi | 11:16 | Tue 02/10/18 ─────────────────────────────────────── v6.16 | Sparky SBC (armv7l) ─────────────────────────────────────── eth0 | 192.168.254.163 ─────────────────────────────────────── DietPi Team : Daniel Knight (founder), MichaIng, K-Plan Web : https://DietPi.com | https://twitter.com/dietpi_ Patreon Legends : PINE64 community Donate : https://DietPi.com/#donate DietPi Hosting : Powered by https://MyVirtualServer.com dietpi-launcher = All the DietPi programs in one place. dietpi-config = Feature rich configuration tool for your device. dietpi-software = Select optimized software for installation. htop = Resource monitor. cpu = Shows CPU information and stats. root@DietPi:~# Connection to 192.168.254.163 closed by remote host. Connection to 192.168.254.163 closed. look like the OS rebooting continuously. you can flash the OS to Micro SD card , and possible to re-flah the OS from Micro SD card to eMMC. contacted through PM Allo.com Tech. Support Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now