Allo PIano Audio out from GPIO

[DM2000]

Hi all,

 

I'm going to make a RPi/Kali/Piano set up in an enclosure that will then pass audio to my amp via RCA.

 

I see that the Piano can pass audio to a volt via the GPIO pins 3,5 and 4,6. 3 and 5 are labelled as audio right. What is the difference between 3 and 5? and can one of these be soldered to an RCA socket on my enclosure? and then one of 4 and 6 be soldered to an RCA socket for the right channel?

 

Thanks a million,

 

Dave

[DM2000]

Can anyone help??

[ALLOsupport]

On 8/19/2018 at 7:13 PM, DM2000 said:

Hi all,

 

I'm going to make a RPi/Kali/Piano set up in an enclosure that will then pass audio to my amp via RCA.

 

I see that the Piano can pass audio to a volt via the GPIO pins 3,5 and 4,6. 3 and 5 are labelled as audio right. What is the difference between 3 and 5? and can one of these be soldered to an RCA socket on my enclosure? and then one of 4 and 6 be soldered to an RCA socket for the right channel?

 

Thanks a million,

 

Dave

3 & 5 same connection ( short) for RIGHT. 4&6 for LEFT . Yes you can take out connection one of these pins.