John A Posted July 3, 2018 Share Posted July 3, 2018 I just updated my USBridge to DietPi 6.10 through the Allo GUI and now my USBridge will not boot. I can see that it is getting power and sometimes the lights flash on the ethernet port but the unit is completely unresponsive. Not sure what to do from here. Link to comment
wakajazz Posted July 4, 2018 Share Posted July 4, 2018 I reported this same issue to Allo support in another thread, so to keep things in order I will add here. My USBridge is also bricked after an upgrade to DietPi 6.10 (Allo GUI). Link to comment
John A Posted July 4, 2018 Author Share Posted July 4, 2018 I had a spare microSD card which I flashed with the new 6.10 image and installed the microSD card in my USBridge and all is working now. I prefer to have the device running off a microSD card so I am happy and good now. I think the issue was that the update was not done when I rebooted and thus corrupted the device. Link to comment
wakajazz Posted July 4, 2018 Share Posted July 4, 2018 Used the method shown here: https://www.amazon.com/clouddrive/share/KnKc59NZN82daHSprgow9hwk8SQYlBmRps3fD4SeIlt to successfully re-flash the eMMC to 6.9 and then upgraded to 6.10 without issue. Link to comment
John A Posted July 4, 2018 Author Share Posted July 4, 2018 Those instructions give me a headache. My way works too. I am now running on a microSD card and actually prefer this as I can swap cards to upgrade instead of bricking my unit like I did the last time. I think that Allo makes great hardware but not so great on the software side. I fully believe that the Allo GUI caused my issue. Note that no one from Allo has weighed in at all on this. Link to comment
msb1 Posted July 5, 2018 Share Posted July 5, 2018 21 hours ago, wakajazz said: Used the method shown here: https://www.amazon.com/clouddrive/share/KnKc59NZN82daHSprgow9hwk8SQYlBmRps3fD4SeIlt to successfully re-flash the eMMC to 6.9 and then upgraded to 6.10 without issue. Hi, Which image did you use on the SD card to begin with? Server | EMM | Dartzeel | Evolution Acoustics Link to comment
wakajazz Posted July 5, 2018 Share Posted July 5, 2018 37 minutes ago, msb1 said: Hi, Which image did you use on the SD card to begin with? The one linked here: https://dietpi.com/phpbb/viewtopic.php?t=2317 However, it sounds like an issue has been identified by Allo with the GUI update process so sounds like I may have got lucky. Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now