Jump to content
IGNORED

ISO REGEN Listening Impressions (kicked off with some measurements)


Recommended Posts

Well, happy to say, I have no pops, crackles, or cackles after grounding the ISO Regen before the Alpha USB.

 

UptonedMacMini(onJS2)>TelluriumSiverDiamondUSB>IsREgen(onLPS1onJS2)>Curious(short)>BerkeleyAlphaUSB>TomboTronBNC>MetrumPavaneDAC>SilvermithPalladium>MargulesSF(20SE)Pre>TelluriumSilverDiamond>MarguesU280c(25SE)Amp>AZAbsoluteSpeakercables>MargulesOrpheus+MarguleSub.CD:Cambridge851C>StealthVaridigSextet>MetrumPavane.

Powerconditioning/cables:AudienceAR6TSSD;KubalaSosnaElationon>AR6;OndaRaptureonPre-andAmp;KaplancablesonDAC/Transport;Combak350>JS-2;AZAbsolute>Alpha USB.

5ab04fc775d4d_2018-02-1511_30_04.thumb.jpg.bdba2e1c8a8ba2d514247b298a41222d.jpg

Link to comment

How do you ground the ISO Regen? 

 
Ypsilon Phaethon Integrated Amplifier w/6H30DR NOS Tubes / SR Orange Fuses > Bricasti Design M1SE MDx DAC w/Network Card / Roon Endpoint > Focal Sopra 2 Loudspeakers >   Antipodes S40 (v5.2H Board / K30 Engine) Audio Server + Antipodes S60 HSL50 Hybrid Linear Power Supply (2-Rails) w/AfterDark Silver Reference Black River Series DC Cables Uptone Audio EtherRegen Network Switch / Re-clocker > AfterDark Emperor Double Crown 10MHz Master Clock Sin wave 75ohm w/Mini Circuits BLP10.7+ BNC Filter > AfterDark Black River Carbon Fiber 75ohm BNC Master Clock Cable  > AfterDark Modernize LPS x2 12V (2-Rails) > Wyred 4 Sound PS-1 LPS (4) Rails  > Solid Tech ROS Reference Model 4 Audio Rack System  > SRA Ohio Class XLIsolation Platform Synergistic Research Tranquility Basik Isolation Platform Active w/MIG 2.0 Footers and Silver Tuning Bullet  > Solid Tech Small TT Isolation Platform (3-Shleves) Tara Labe: The One Power Cord 2.0M (5-Cables> Audience AU24se HP 1.0M AC Power Cable  > Nordost Frey 2 Speaker Cables 4.0M Spades > Nordost Frey 2 XLR Interconnects 1.0M > High Fidelity Cables Reveal XLR Interconnects 5.0MAudioquest Vodka and Cardas Clear Ethernet RJ/E Cables  > Synergistic Research Atmosphere Acoustic Field Generator Tower Mini w/ATM Red Tuning Module  > (15Synergistic Research HFT’s (6PS Audio Noise Harvesters;
 DESKTOP 2nd SystemDali Menuet Loudspeakers (Gloss Black) > Rega Brio Integrated Amplifier (2021)Denafrips Aries II R2R DAC > Singxer SU-2 USB Digital Interface > Antipodes S40/S60 Audio Server / Roon Core (Networked from Main system) >Apple iMac Retina 5k 27-Inch (2021) Roon Remote / USB AudioKanto S6 Desktop Speaker Stands > Cardas Neutral Reference Speaker Cables 1.0M  Spades > Darwin Ascension Plus Silver Interconnects RCA 0.3M > Tara Labs The One AC Power Cord (2) > Zu Event MKI AC Power Cable 1.0M > Cardas Clear USB Cable 1.0M > Curious Cables USB Regen LinkBlack Cat Silver Star BNC S/PDIF Cable 1.0M > Synergistic Research Tesla QLS-6 Power Strip 
 
~ Fsmithjack            
 My Website  https://ctronicmusic.com/ 

Ypsilon  Bricasti  / Focal  Uptone Nordost / AfterDark / Solid Tech  

 

46AC9095-7EB4-4698-82FE-FC5E9E837893.png

Link to comment
5 minutes ago, fsmithjack said:

How do you ground the ISO Regen? 

 

Grounded the ISO Regen through to my Pre-Amp (separate) Power Supply, thus defeating the floating ground of the Berkeley Alpha USB, and turned on the Isolation switch of the IR: no dropouts, pops, crackles, but even more the music is incredible, the sound is super. Alex/Superdad provided instructions earlier in this post/exchange.

UptonedMacMini(onJS2)>TelluriumSiverDiamondUSB>IsREgen(onLPS1onJS2)>Curious(short)>BerkeleyAlphaUSB>TomboTronBNC>MetrumPavaneDAC>SilvermithPalladium>MargulesSF(20SE)Pre>TelluriumSilverDiamond>MarguesU280c(25SE)Amp>AZAbsoluteSpeakercables>MargulesOrpheus+MarguleSub.CD:Cambridge851C>StealthVaridigSextet>MetrumPavane.

Powerconditioning/cables:AudienceAR6TSSD;KubalaSosnaElationon>AR6;OndaRaptureonPre-andAmp;KaplancablesonDAC/Transport;Combak350>JS-2;AZAbsolute>Alpha USB.

5ab04fc775d4d_2018-02-1511_30_04.thumb.jpg.bdba2e1c8a8ba2d514247b298a41222d.jpg

Link to comment

Oh ok thx 

 
Ypsilon Phaethon Integrated Amplifier w/6H30DR NOS Tubes / SR Orange Fuses > Bricasti Design M1SE MDx DAC w/Network Card / Roon Endpoint > Focal Sopra 2 Loudspeakers >   Antipodes S40 (v5.2H Board / K30 Engine) Audio Server + Antipodes S60 HSL50 Hybrid Linear Power Supply (2-Rails) w/AfterDark Silver Reference Black River Series DC Cables Uptone Audio EtherRegen Network Switch / Re-clocker > AfterDark Emperor Double Crown 10MHz Master Clock Sin wave 75ohm w/Mini Circuits BLP10.7+ BNC Filter > AfterDark Black River Carbon Fiber 75ohm BNC Master Clock Cable  > AfterDark Modernize LPS x2 12V (2-Rails) > Wyred 4 Sound PS-1 LPS (4) Rails  > Solid Tech ROS Reference Model 4 Audio Rack System  > SRA Ohio Class XLIsolation Platform Synergistic Research Tranquility Basik Isolation Platform Active w/MIG 2.0 Footers and Silver Tuning Bullet  > Solid Tech Small TT Isolation Platform (3-Shleves) Tara Labe: The One Power Cord 2.0M (5-Cables> Audience AU24se HP 1.0M AC Power Cable  > Nordost Frey 2 Speaker Cables 4.0M Spades > Nordost Frey 2 XLR Interconnects 1.0M > High Fidelity Cables Reveal XLR Interconnects 5.0MAudioquest Vodka and Cardas Clear Ethernet RJ/E Cables  > Synergistic Research Atmosphere Acoustic Field Generator Tower Mini w/ATM Red Tuning Module  > (15Synergistic Research HFT’s (6PS Audio Noise Harvesters;
 DESKTOP 2nd SystemDali Menuet Loudspeakers (Gloss Black) > Rega Brio Integrated Amplifier (2021)Denafrips Aries II R2R DAC > Singxer SU-2 USB Digital Interface > Antipodes S40/S60 Audio Server / Roon Core (Networked from Main system) >Apple iMac Retina 5k 27-Inch (2021) Roon Remote / USB AudioKanto S6 Desktop Speaker Stands > Cardas Neutral Reference Speaker Cables 1.0M  Spades > Darwin Ascension Plus Silver Interconnects RCA 0.3M > Tara Labs The One AC Power Cord (2) > Zu Event MKI AC Power Cable 1.0M > Cardas Clear USB Cable 1.0M > Curious Cables USB Regen LinkBlack Cat Silver Star BNC S/PDIF Cable 1.0M > Synergistic Research Tesla QLS-6 Power Strip 
 
~ Fsmithjack            
 My Website  https://ctronicmusic.com/ 

Ypsilon  Bricasti  / Focal  Uptone Nordost / AfterDark / Solid Tech  

 

46AC9095-7EB4-4698-82FE-FC5E9E837893.png

Link to comment

Had my isoregen in my system a few weeks now. It is powered by LPS-1 and fed by microrendu powered by a second Lps-1. IR connected to microrendu with sonore USB adapter and same for IR to Schiit Yggy dac.  When first installed the IR I noticed clear improvements. Nice addition. However, since then, I have installed a Schiit USB Gen5 USB board. I listened for about a week and then tested with and without IR. I thought maybe there was a slight improvement with the IR over no IR but ultimately dedcided if there was a difference it was very subtle or non existent. The USB Gen5 board really works. So I am taking out the IR and probably selling. Not sure yet if I would get an improvement upgrading to 1.4 or ultrarendu but Schiit seems to think not.

 

here are some other observations. I had installed two FMCs with fiber optic connector and powered one closest to microrendu with Lps-1 split with microrendundu. Ran somewhat hot. With separa Lps-1 it runs cooler. Again after testing with and without FMCs I took them out of system since I really didn't make any difference in my system. If any interest I am selling the fmcs on Usaudiomart.

Link to comment
On 8/3/2017 at 7:18 AM, agladstone said:

Although I'm quite sure the LPS-1 and ISO Regen are still burning in, I'm updating my listening results and experiments thus far:

the first thing I did was just simply replace my IFI Micro iUSB 3.0 with the LPS-1 / ISO Regen combination. Immediately it was obvious that the LPS-1 / ISO was far superior to the IFI iMicro, I've never heard anything sound so good before! So airy and detailed and dead quite background. 

As an experiment I just put the IFI Micro iUSB back into the chain as follows:

aurender -> Cardas Highspeed split USB cable -> LPS-1 (fed by an IFI 12V iPower, cardas 4S6 DC cable to ISO) /ISO Regen -> USPA-B adapter-> IFI Micro iUSB 3.0 (fed by HDPLEX 100W with Cardas 4S6 DC cable)  -> second USPA-B adapter-> Mytek DAC 

All I can say about this "chain" is ,,  OH MY!! 

It really takes the LPS-1 / ISO  Regen to the next level!!  It's sounds so good I can't possibly imagine anything sounding any better regardless of $ spent , I doubt there is literally any improvement left to possibly be made to my aurender to DAC USB chain!! 

I would make the following statement:

W4S RUR - 5/10 

IFI Micro iUSB 3.0 - 7/10 

LPS-1 / ISO - 9/10

LPS-1/ ISO/ IFI Micro - 12/10 ! 

 

Interesting. I already sold my IFI Micro. Just curious what were the SQ differences with having the IFI in the chain now and without?

HD-PLEX LPS > SLK (Chinese) DC Power Cable > Mac Mini 2012 (Uptone MMK / SnakeOil OS) > LPS-1 > UpTone ISO Regen > USPCB > Chord Mojo > WireWorld Nano-Silver Eclipse > AudioEngine A2+

Link to comment
On 21 September 2017 at 8:24 AM, elcorso said:

 

Pete,

 

Please check your AC receptacles for inverted polarity, or open ground somewhere.

59c30669a028e_Polaritytester.thumb.jpg.a62a36c712433f1d62ad4ec455b4bcde.jpg

 

They are inexpensive and easy to use, they are available at hardware stores.

 

Roch

Thanks Roch. Did as suggested but there are no problems with regards to this so still no closer to solving why the lps-1 causes increased input switching to my TT. I have been using my system with lps-1 out of chain for some days now and switching is rare.

 

Link to comment

This is probably an off-topic question, but I'm going to ask it anyway because I know some of you have a similar configuration and might have an answer for me.

 

My configuration is: Mac Mini -> uRendu -> ISO Regen -> Singxer SU-1 -> Holo Spring DAC.

 

I just rebooted my uRendu and now my DAC won't recognize any incoming signal. I tried turning off the Singxer and DAC, then rebooting the uRendu again, then turning the Singxer and DAC back on - but no luck. I tried a few other combinations, and still no luck.

 

I know there is a very specific reboot sequence that works, I just can't remember what it is!  This happened a few weeks ago and I figured it out, but I forgot what it is. NOTE: This just started happening when I began using the ISO Regen in place of my Regen.

 

Anyone know what the magic reboot sequence is that works?

 

Thanks!

Intel NUC NUC8i7BEH Roon Server running Audio Linux in RAM -> Sonore UltraRendu (Roon Endpoint) -> Uptone ISO Regen -> Singxer SU-1 KTE -> Holo Audio Spring Level 3 DAC -> Nord One UP Monoblocks -> Spendor LS3/5as | Music controlled via iPad (Power Conditioning: Audience adeptResponse aR12).  Twitter: @hirezaudio

Link to comment
1 hour ago, gsquared said:

Anyone know what the magic reboot sequence is that works?

All I've discovered is that the ISO REGEN has to be powered up before the microRendu.

Pareto Audio AMD 7700 Server --> Berkeley Alpha USB --> Jeff Rowland Aeris --> Jeff Rowland 625 S2 --> Focal Utopia 3 Diablos with 2 x Focal Electra SW 1000 BE subs

 

i7-6700K/Windows 10  --> EVGA Nu Audio Card --> Focal CMS50's 

Link to comment
7 hours ago, gsquared said:

This is probably an off-topic question, but I'm going to ask it anyway because I know some of you have a similar configuration and might have an answer for me.

 

My configuration is: Mac Mini -> uRendu -> ISO Regen -> Singxer SU-1 -> Holo Spring DAC.

 

I just rebooted my uRendu and now my DAC won't recognize any incoming signal. I tried turning off the Singxer and DAC, then rebooting the uRendu again, then turning the Singxer and DAC back on - but no luck. I tried a few other combinations, and still no luck.

 

I know there is a very specific reboot sequence that works, I just can't remember what it is!  This happened a few weeks ago and I figured it out, but I forgot what it is. NOTE: This just started happening when I began using the ISO Regen in place of my Regen.

 

Anyone know what the magic reboot sequence is that works?

 

Thanks!

I use an sMS-200ultra. I also have to take care of the boot sequence. For me, it's quite simple. Power-on the Iso Regen at the end and after network activity starts on the sMS-200.

Link to comment

Thanks for the suggestions ricka and afrancois.

 

In my setup, I figured it out - all I had to do is turn off the DAC, then reboot the uRendu and when it starts again, turn the DAC back on and everything works fine! If I leave the DAC on and reboot the uRendu, no signal is received to the DAC.

 

Just a little idiosyncrasy that I have to deal with, but it's worth it because of the sound I'm getting!

Intel NUC NUC8i7BEH Roon Server running Audio Linux in RAM -> Sonore UltraRendu (Roon Endpoint) -> Uptone ISO Regen -> Singxer SU-1 KTE -> Holo Audio Spring Level 3 DAC -> Nord One UP Monoblocks -> Spendor LS3/5as | Music controlled via iPad (Power Conditioning: Audience adeptResponse aR12).  Twitter: @hirezaudio

Link to comment
On 2017-09-22 at 7:27 AM, Cornan said:

 

 

Hi John!

 

I am trying to understand why a Regen Amber feeding a ISO Regen increase SQ in my setup with GI on. Without the Regen Amber feeding the ISO Regen it sounds hollow and thin. Using a Teradak USB Y-split cable with injection into ISO Regen improves SQ, but only still better with GI off. 

 

My ISO Regen is powered by a floating SMPS. The power leg to the Teradak USB Y-split is connected to a DC starquad Y-split powering both Aqvox switch and ISO Regens 5v injection via a floating SMPS. When I used the Regen Amber as a voltage regulator for the Aqvox switch (Regen Ambers DC input into starquad DC Y-split cable with power from floating SMPS and a USB to DC starquad into Aqvox) the SQ decreased. That made me think that there was a internal leakage loop of some king going on, and the USB voltage regulator of Regen Amber helped to filter or block this loop. This is ofcourse just a theory so far and I want to find out IF using external voltage regulators (2 pcs LT3045 in series with voltage drop down from 9v>8v>7v) pre ISO Regens DC input could isolate the leakage. It is all a mystery and an experiment from my side to find out the Regen Amber pre ISO Regen mystery.

 

If you have a better suggestion I am all ears! ?

 

IMG_6618.thumb.JPG.cd32f5dc7964a2d6c80ddb0b5d9149b2.JPGIMG_6620.thumb.JPG.47c6efe52e3233f53f02273c74340c8c.JPGIMG_6617.thumb.JPG.c0288f073e7d57075fb8040cbf9bfa98.JPGIMG_6600.thumb.JPG.f4eadb07c36548e4583ae74a936d54f6.JPGIMG_6609.thumb.JPG.3ad3350b089e973c30aed704ffa61dc6.JPG

 

I thought an update would be in order. 

After trying the DC negative grounding on my three floating SMPSs (grounded to a Entreq Minimus Grounding box which sounded better than grounded to the powerstrip) two amazing things happened in my setup:

 

1. Now suddenly the ISO Regen sounds wonderful with galvanic isolation on using a Vertere D-Fi Pulse V2 USB cable between Auralic Aries Mini and ISO Regen and USPCB between ISO Regen and Brooklyn DAC. No need to use my Regen Amber pre the ISO Regen anymore.

 

2. I use to ground the chassi of my AQVOX switch-8. After the DC negative grounding that improvement was not at all as important anymore. However, I will need to run additional test to confirm if the need is just reduced or actually removed all together.

 

Anyway, I hope this could help others. A big hug to @JohnSwenson for suggesting this simple and very effective tweak! :)

 

 

 

Link to comment

one more finding after switching ISO Regen's GI off: my Aries now "remembers" again (as it used to do with the "amber" Regen) which output to use (Audiophilleo) instead of reverting to "Digital outputs", after a while nothing was playing, as it was doing with GI on :)

Qnap HS-264 NAS (powered by an HD-Plex 100w LPS) > Cirrus7 Nimbini v2.5 Media Edition i7-8559U/32/512 running Roon ROCK (powered by a Keces P8 LPS) > Lumin U2  > Metrum Acoustics Adagio NOS digital preamplifier > First Watt SIT 3  power amplifier (or Don Garber Fi "Y" 6922 tube preamplifier + Don Garber Fi "X" 2A3 SET power amplifier, both powered from an Alpha-Core BP-30 Isolated Symmetrical Power Transformer) > Klipsch Cornwall III

 

headphones system:

Cirrus 7 > Lumin U2 > Metrum Acoustics Adagio > Pathos Aurium amplifier (powered by an UpTone Audio JS-2 LPS) > Focal Clear headphones

Link to comment
1 hour ago, Cornan said:

 

I thought an update would be in order. 

After trying the DC negative grounding on my three floating SMPSs (grounded to a Entreq Minimus Grounding box which sounded better than grounded to the powerstrip) two amazing things happened in my setup:

 

1. Now suddenly the ISO Regen sounds wonderful with galvanic isolation on using a Vertere D-Fi Pulse V2 USB cable between Auralic Aries Mini and ISO Regen and USPCB between ISO Regen and Brooklyn DAC. No need to use my Regen Amber pre the ISO Regen anymore.

 

2. I use to ground the chassi of my AQVOX switch-8. After the DC negative grounding that improvement was not at all as important anymore. However, I will need to run additional test to confirm if the need is just reduced or actually removed all together.

 

Anyway, I hope this could help others. A big hug to @JohnSwenson for suggesting this simple and very effective tweak! :)

 

As I have stated/indicated, again and again, grounding the ISO Regen -- to defeat the floating ground of an expensive component in my set-up -- and turning on the GI yielded/yields remarkable results.

 

UptonedMacMini(onJS2)>TelluriumSiverDiamondUSB>IsREgen(onLPS1onJS2)>Curious(short)>BerkeleyAlphaUSB>TomboTronBNC>MetrumPavaneDAC>SilvermithPalladium>MargulesSF(20SE)Pre>TelluriumSilverDiamond>MarguesU280c(25SE)Amp>AZAbsoluteSpeakercables>MargulesOrpheus+MarguleSub.CD:Cambridge851C>StealthVaridigSextet>MetrumPavane.

Powerconditioning/cables:AudienceAR6TSSD;KubalaSosnaElationon>AR6;OndaRaptureonPre-andAmp;KaplancablesonDAC/Transport;Combak350>JS-2;AZAbsolute>Alpha USB.

5ab04fc775d4d_2018-02-1511_30_04.thumb.jpg.bdba2e1c8a8ba2d514247b298a41222d.jpg

Link to comment
On 22/09/2017 at 9:39 PM, Superdad said:

 

Well thanks much for that, yet I caution that our products--and refined sound in general--are not at all about belief.  9_9 

 

 

Hi Alex

 

Sorry - when I read my post back I can see what you mean.

 

I did not in anyway mean to suggest that your products or others products, are not meticulously designed and built using scientific methods. 

 

I was trying (poorly) to express that measurements to me personally need to be also taken with caution. Seems to me a balance is needed between us interpreting what we hear and what measurements can tell us. Keeping open minds perhaps! 

Link to comment
On 9/18/2017 at 5:32 PM, Matias said:

@Superdad

After a few months with my ISO Regen I definitely find it a lot more sensitive than the USB Regen. I leave the ISO Regen on during the day, and at night I turn the DAC and amps on, most times the DAC is not found  by Win10. Even when it is, there is some popping and clicking going on. I have then to power the ISO Regen off and on, then it works. And I think I may be hearing some clicking sometimes, or maybe I have gone crazy. It is really this sensitive?

 

Hi Matias:

 

Sorry to be slow in reply.  There is a small chance that you have an ISO REGEN with the early issues we had.  But yes, with full isolation on, the ISO REGEN (or should I say DACs) are more sensitive/fussy about grounding and EMI transients that might be present.

 

First thing is to try the ISO REGEN for a couple of days with the red switch in the up ("ON") position.  This defeats the galvanic isolation (but not the rest of device's benefits) and is a good diagnostic as to if you have other grounding issues--or if your early unit needs to be replaced (the symptoms are so similar, so the switch is the only way to know for sure).

 

Please feel free to contact me directly to further your particular case.

 

Thanks,

 

--Alex C.

Link to comment
31 minutes ago, jrd1975 said:

I did not in anyway mean to suggest that your products or others products, are not meticulously designed and built using scientific methods. 

 

I know. B|

I just did not want to give perch to our critics who like to deride this as stuff of delusional belief.  And I took the opportunity to elucidate from there. It was a Friday after all..

--AJC

Link to comment

Out of curiosity... has anyone with an Ultrarendu + LPS1 had any sonic benefits by using an ISOregen + LPS1 after it ?

I remember reading a few posts where the answer was no, but I can't recall any with a positive result.

In my setup I simply can't hear any difference and I would like to know if it's me or if that is the general consensus.

 

Many thanks !

Stefano

Link to comment
26 minutes ago, sbilotta said:

Out of curiosity... has anyone with an Ultrarendu + LPS1 had any sonic benefits by using an ISOregen + LPS1 after it ?

I remember reading a few posts where the answer was no, but I can't recall any with a positive result.

In my setup I simply can't hear any difference and I would like to know if it's me or if that is the general consensus.

 

Many thanks !

Stefano

 

I don't know about consensus, but in my system ultraRendu+LPS-1alone sounds more clear and more lifelike than the same plus ISO REGEN+LPS-1.

 

Guido.

For my system details, please see my profile. Thank you.

Link to comment
22 hours ago, sbilotta said:

Out of curiosity... has anyone with an Ultrarendu + LPS1 had any sonic benefits by using an ISOregen + LPS1 after it ?

I remember reading a few posts where the answer was no, but I can't recall any with a positive result.

In my setup I simply can't hear any difference and I would like to know if it's me or if that is the general consensus.

 

Many thanks !

Stefano

 

I have the UltraRendu +LPS-1 with ISO-Regen +LPS-1. Depending on your system and preference in sounds signature, for me I really like the ISO-Regen with uRendu. I feels that the ISO-Regen with LPS-1 adds naturalness and a bit of warmth and smoothness to the mid-range and actually tone down a little bit of slight digital glare at the top end. Basically, to my system and my ears, some refinements in sound is added with the ISO-Regen.

"Its the REF clock that makes it all so good..."

Link to comment
On 9/24/2017 at 1:11 PM, No Disc said:

 

Interesting. I already sold my IFI Micro. Just curious what were the SQ differences with having the IFI in the chain now and without?

The ISO Regen out of music player (Computer, uRendu, Aurender, etc) -> IFI Micro 3.0 -> DAC 

sounds MUCH better than ISO Regen alone and better than IFI Micro 3.0 alone. 

The combination of the two together in a “USB cleaner/ reclocker” chain (*with ISO first going into Micro) sounds incredible! The ISO Regen definitely refined and cleans up the IFI Micro 3.0 and takes it’s perfor from a 8.5 to a 10! 

 

Link to comment
  • 2 weeks later...
On 9/28/2017 at 7:53 PM, Guidof said:

 

I don't know about consensus, but in my system ultraRendu+LPS-1alone sounds more clear and more lifelike than the same plus ISO REGEN+LPS-1.

 

Guido.

Thanks Guido et al.

I have another question and that is if the IsoRegen can play DXD i.e. above 24-192 resolution; I have tried and it seems not, but I would like confirmation from the community or Alex on this.

Any experiences ?

 

Thanks again

Stefano

Link to comment
6 minutes ago, sbilotta said:

Thanks Guido et al.

I have another question and that is if the IsoRegen can play DXD i.e. above 24-192 resolution; I have tried and it seems not, but I would like confirmation from the community or Alex on this.

Any experiences ?

 

Thanks again

Stefano

Stefano, yes the ISO Regen used here works fine with both Hqplayer upsampled  pcm 768kb/24 and dsd 512 streaming music.

Pareto Audio aka nuckleheadaudio

Link to comment
8 minutes ago, lmitche said:

Guido, yes the ISO Regen I use here works fine with both Hqplayer upsampled  pcm 768kb and dsd 512 streaming music.

Thanks @lmitche. I took the Isoregen out of the chain and DXD played fine, as in the past. After your answer though I put the isoregen back in again and it works fine too... now...

Oh well, it works and that's all that counts.

Thanks again, and btw I'm Stefano :-)

 

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...