Jump to content
IGNORED

Magneplanar 1.7 vs 3.6r (with a little bit about 3.7s and mini maggies)


Recommended Posts

Hi guys, I recently picked up a pair of Maggie 1.7s for my second system. However, prior to purchasing them, I was actually offered a pair of used 3.6Rs for "just" 800 more and decided to investigate the differences. I have a friend who has a pair of 3.6Rs in his main system and I managed to borrow a pair of 1.7s from another audiophile for a week (in exchange for a week with my LCD-3 Headphones) so I brought the 1.7s over to my friend's place and started the comparisons.

 

Firstly, the room dimensions were rectangular with about a 8 meter long front wall and about 10 meter depth. Height was roughly 3-3.5 meters. So, anyway, there was quite a lot of space. His standard set up for the 3.6r which we agreed sounds best consists of the speakers about 2 meters from the front wall, about 1.5 meters from each side wall and toed in about 10 degrees. The listening position was centered, about 6 meters from the speakers. For the 1.7s we experimented a bit but interestingly, found that placing them in a similar spot to the vacated 3.6rs provided the best sound. The source equipment we used were my friends Audio Research CD5, my Moon 750D and my NAD M51. Amplification was his Audio Research DSi200 integrated which pumps 300 watts into 4ohms so power was there aplenty. So as not to make the comparison too complicated, I refrained from bringing my Moon 700i into the test. After experimenting with both speakers , we came to the conclusion that the Moon 750D uses as a full CD player had the best sound (kinda expected from the price) with the most detail and most holographic soundstage. Have to say the AR CD5 and NAD M51 were no slouches either and both were very satisfying too. So, anyway, all impressions from here on are based on the Moon 750D>Audio Research DSi200>Magneplanar 1.7/3.6R. Cables used were all audioquest, not sure about the models as they were my friends though I do remember that the XLR interconnects between DAC and amp were the Columbia model.

 

The music we used to test the two speakers was from a wide range of sources including pop, rock, jazz, blues, electronic, modern folk, country, classical and some choral music. We listened to some great tracks from various artists like Diana Krall, U2, Crystal Castles, Swimming with Dolphins, Louis Armstrong, Steely Dan, etc etc. Anyway, lots of great music from a swathe of genres. Some stand out tracks were the ones from Jason Mraz's new album, Love is a four letter word as well as the tracks from the explorations in space and time album from a laptop as this was a high res 24/176 track download.

 

Now, finally moving on to the comparisons. I won't be doing a track by track breakdown as both speakers are actually not too different and their inherent strengths and weaknesses against each other seemed to be replicated across most tracks. The first stand out difference between the two speakers and I mean really stand out is that the 1.7s are a lot more coherent. This might not seem like a huge thing to most but it really stands out, the 1.7s almost sound like good point source monitors while the 3.6rs though not bad sound like conventional loudspeakers and are about average in this regard. This leads me to the next point, that the 3.6rs as some others have pointed out, utilize full ribbon tweeters and quasi ribbon mid and bass modules. This causes the crossover points to stand out more and make the transistion between the treble to the midrange stand out more. This was especially evident on vocal tracks as the 3.6rs just lacked the brilliant coherency and smoothness of the 1.7s. Moving on to the next point, the 3.6rs just have better bass thump and this is very evident too, probably the most evident difference apart from the difference in coherency. In this respect, the 3.6rs are just better, having better bass impact and reaching deeper, helping them reproduce bass notes more realistically from drums, bass guitars, etc. Furthermore, the 3.6rs also seem to be able to better retain their bass reproduction at various listening positions throughout the room. Do note, that the 1.7s bass is not poor and is actually very fast, tight and detailed down to about 40-45 hz.

 

A very pertinent point that people might question is whether the significantly more expensive (when available) 3.6rs are more detailed. I'd have to honestly say yes and no. They do have slightly more treble detail which is especially appreciable from female vocal tracks. However, something interesting we found out is that through the heart of the midrange, the 1.7s are actually more detailed and helped uncover more layers of musical information. This was really quite interesting and though the 3.6rs seemd more detailed upon first listen due to their slightly protruded treble response and better treble detail, after more listening, the 1.7s midrange dos indeed offer more insight into the music. We surmised that this is probably due to the newly designed quasi ribbon panels that the 1.7s use.

 

The next interesting thing that we found out is that when configure with spacers installed to tilt the 1.7s backwards slightly, they actually have greater soundstage height than the 3.6rs though they sacrifice a touch of detail when set up like that. All in all though, my friend and I came to the conclusion that it sounded better with the spacers installed to tilt the speakers backwards as the increased sound stage height was beneficial in more accurately conveying the the stage and scale of large orchestral pieces and most live music. This configuration also helped the speakers sound better when we listened while standing up.

 

All in all, we came to the decision that the 1.7s are indeed the superior speakers on balance. The 3.6rs do indeed live up to their reputation as better bass performers and their full ribbon tweeters do produce slightly more airy and detailed treble. However, the 1.7s impressive midrange performance, significantly better coherency as well as their unexpected triumph in the soundstage department (very small difference though) lead us to crown them the unexpected winners of this shootout. My friend has decided to try and sell his 3.6rs now and pick up a pair of 1.7s as he found them better too. He's also thinking of adding some subs or maggie dwm bass module panels to augment the 1.7s bass performance. I happily decided to get a pair of 1.7s for my second system, passing up the chance to pick up the used 3.6rs. I am very happy that I made this descision now as the 1.7s are really enjoyable and I can always head down to my B and W 802Ds for bass when I miss some thump.

 

Final notes. I would really strongly recommend anyone in a similar situation to me (deciding between the 3.6r and the 1.7) to try and get a chance to A-B them. However, if you do not have the opportunity to compare them, trust me and get the 1.7s, you won't regret it. One last thing is that being the curious person I am, I headed down to my local dealer to try the 3.7s (and mini maggies) just for fun. I have to say I was very impressed. They largely combined the strengths of both the 1.7s and 3.6rs and notched up the detail a bit more compared to the 1.7s from memory. However, this was in the dealer's room so not exactly a fair comparison but the 3.7s did indeed seem to have all the strengths of the 1.7s and 3.6rs with none of the weaknesses. The mini maggies were pretty good too, sounding slightly more detailed than the 1.7s but I didn't like them as they had so so sound stage width and poor soundstage depth. I actually preferred the cheaper (due to built in amp) focal studio 6BE monitors for desk/nearfield use. On the whole, I am extremely satisfied with my 1.7s and can honestly say I feel no urge to upgrade to the 3.7s, which really says a lot about just how brilliant the 1.7s are. Absolutely fantastic value for the money!

Link to comment

And then there are the Magnestand adherents! I think magnetic-planar bass drivers in a wood frame are bound to be better than quasi-ribbon bass drivers, and planar, quasi-ribbon and ribbon drivers will all benefit from a wood frame. As for your friend, I'd keep the 3.6s and get them "Gunned". In addition, Magnepan DWM bass panels only give you more of the same, don't dig much deeper than 35 Hz and are really designed to be used with the Magnepan models which only reach down to 80 or 100 Hz. For true bass impact to integrate with Magnepans, sealed, servo-controlled, low-Q subwoofers work well. The Rythmik F12 for the same price as the DWM will provide better bass program material reproduction in conjunction with Magnepan loudspeakers.

13.3" MacBook Air, 4GB RAM, 256GB SSD; iTunes/Bit Perfect; MacBook Air SuperDrive; Western Digital My Book Essential 2TB USB HD; Schiit Bifrost USB DAC; Emotiva USP-1, ERC-1 and two UPA-1s; Pro-Ject Xpression III and AT440MLa; AKAI AT-2600 and Harman Kardon TD4400; Grado SR80i; Magnepan MMG Magnestands; and, Rythmik Audio F12

Link to comment

I got to do this very comparison at a dealer, using electronics from Ayre. I completely agree, BTW, about the "coherence thing". The new models do this in a way like no other speaker I know. As for getting the old models gunned ... I've heard nothing but great things from folks that have gone that route. I haven't tried it, so I can't speak from experience, but I have heard from trustworthy friends that the approach is worth looking in to. Personally, I tend to adhere closer to stock, but the Magnestands did change the sound of my 3.7s so much that I no longer use them with subwoofers.

Link to comment
Hi guys, I recently picked up a pair of Maggie 1.7s for my second system. However, prior to purchasing them, I was actually offered a pair of used 3.6Rs for "just" 800 more and decided to investigate the differences. I have a friend who has a pair of 3.6Rs in his main system and I managed to borrow a pair of 1.7s from another audiophile for a week (in exchange for a week with my LCD-3 Headphones) so I brought the 1.7s over to my friend's place and started the comparisons.

 

Firstly, the room dimensions were rectangular with about a 8 meter long front wall and about 10 meter depth. Height was roughly 3-3.5 meters. So, anyway, there was quite a lot of space. His standard set up for the 3.6r which we agreed sounds best consists of the speakers about 2 meters from the front wall, about 1.5 meters from each side wall and toed in about 10 degrees. The listening position was centered, about 6 meters from the speakers. For the 1.7s we experimented a bit but interestingly, found that placing them in a similar spot to the vacated 3.6rs provided the best sound. The source equipment we used were my friends Audio Research CD5, my Moon 750D and my NAD M51. Amplification was his Audio Research DSi200 integrated which pumps 300 watts into 4ohms so power was there aplenty. So as not to make the comparison too complicated, I refrained from bringing my Moon 700i into the test. After experimenting with both speakers , we came to the conclusion that the Moon 750D uses as a full CD player had the best sound (kinda expected from the price) with the most detail and most holographic soundstage. Have to say the AR CD5 and NAD M51 were no slouches either and both were very satisfying too. So, anyway, all impressions from here on are based on the Moon 750D>Audio Research DSi200>Magneplanar 1.7/3.6R. Cables used were all audioquest, not sure about the models as they were my friends though I do remember that the XLR interconnects between DAC and amp were the Columbia model.

 

The music we used to test the two speakers was from a wide range of sources including pop, rock, jazz, blues, electronic, modern folk, country, classical and some choral music. We listened to some great tracks from various artists like Diana Krall, U2, Crystal Castles, Swimming with Dolphins, Louis Armstrong, Steely Dan, etc etc. Anyway, lots of great music from a swathe of genres. Some stand out tracks were the ones from Jason Mraz's new album, Love is a four letter word as well as the tracks from the explorations in space and time album from a laptop as this was a high res 24/176 track download.

 

Now, finally moving on to the comparisons. I won't be doing a track by track breakdown as both speakers are actually not too different and their inherent strengths and weaknesses against each other seemed to be replicated across most tracks. The first stand out difference between the two speakers and I mean really stand out is that the 1.7s are a lot more coherent. This might not seem like a huge thing to most but it really stands out, the 1.7s almost sound like good point source monitors while the 3.6rs though not bad sound like conventional loudspeakers and are about average in this regard. This leads me to the next point, that the 3.6rs as some others have pointed out, utilize full ribbon tweeters and quasi ribbon mid and bass modules. This causes the crossover points to stand out more and make the transistion between the treble to the midrange stand out more. This was especially evident on vocal tracks as the 3.6rs just lacked the brilliant coherency and smoothness of the 1.7s. Moving on to the next point, the 3.6rs just have better bass thump and this is very evident too, probably the most evident difference apart from the difference in coherency. In this respect, the 3.6rs are just better, having better bass impact and reaching deeper, helping them reproduce bass notes more realistically from drums, bass guitars, etc. Furthermore, the 3.6rs also seem to be able to better retain their bass reproduction at various listening positions throughout the room. Do note, that the 1.7s bass is not poor and is actually very fast, tight and detailed down to about 40-45 hz.

 

A very pertinent point that people might question is whether the significantly more expensive (when available) 3.6rs are more detailed. I'd have to honestly say yes and no. They do have slightly more treble detail which is especially appreciable from female vocal tracks. However, something interesting we found out is that through the heart of the midrange, the 1.7s are actually more detailed and helped uncover more layers of musical information. This was really quite interesting and though the 3.6rs seemd more detailed upon first listen due to their slightly protruded treble response and better treble detail, after more listening, the 1.7s midrange dos indeed offer more insight into the music. We surmised that this is probably due to the newly designed quasi ribbon panels that the 1.7s use.

 

The next interesting thing that we found out is that when configure with spacers installed to tilt the 1.7s backwards slightly, they actually have greater soundstage height than the 3.6rs though they sacrifice a touch of detail when set up like that. All in all though, my friend and I came to the conclusion that it sounded better with the spacers installed to tilt the speakers backwards as the increased sound stage height was beneficial in more accurately conveying the the stage and scale of large orchestral pieces and most live music. This configuration also helped the speakers sound better when we listened while standing up.

 

All in all, we came to the decision that the 1.7s are indeed the superior speakers on balance. The 3.6rs do indeed live up to their reputation as better bass performers and their full ribbon tweeters do produce slightly more airy and detailed treble. However, the 1.7s impressive midrange performance, significantly better coherency as well as their unexpected triumph in the soundstage department (very small difference though) lead us to crown them the unexpected winners of this shootout. My friend has decided to try and sell his 3.6rs now and pick up a pair of 1.7s as he found them better too. He's also thinking of adding some subs or maggie dwm bass module panels to augment the 1.7s bass performance. I happily decided to get a pair of 1.7s for my second system, passing up the chance to pick up the used 3.6rs. I am very happy that I made this descision now as the 1.7s are really enjoyable and I can always head down to my B and W 802Ds for bass when I miss some thump.

 

Final notes. I would really strongly recommend anyone in a similar situation to me (deciding between the 3.6r and the 1.7) to try and get a chance to A-B them. However, if you do not have the opportunity to compare them, trust me and get the 1.7s, you won't regret it. One last thing is that being the curious person I am, I headed down to my local dealer to try the 3.7s (and mini maggies) just for fun. I have to say I was very impressed. They largely combined the strengths of both the 1.7s and 3.6rs and notched up the detail a bit more compared to the 1.7s from memory. However, this was in the dealer's room so not exactly a fair comparison but the 3.7s did indeed seem to have all the strengths of the 1.7s and 3.6rs with none of the weaknesses. The mini maggies were pretty good too, sounding slightly more detailed than the 1.7s but I didn't like them as they had so so sound stage width and poor soundstage depth. I actually preferred the cheaper (due to built in amp) focal studio 6BE monitors for desk/nearfield use. On the whole, I am extremely satisfied with my 1.7s and can honestly say I feel no urge to upgrade to the 3.7s, which really says a lot about just how brilliant the 1.7s are. Absolutely fantastic value for the money!

 

Please drop me a personal message if you/your friend get around to setting up a 1.7 plus subwoofer setup. Am considering a similar setup and would love to know how that compares to a 3.6 setup. Great read btw.

Link to comment
This leads me to the next point, that the 3.6rs as some others have pointed out, utilize full ribbon tweeters and quasi ribbon mid and bass modules. This causes the crossover points to stand out more and make the transistion between the treble to the midrange stand out more. This was especially evident on vocal tracks as the 3.6rs just lacked the brilliant coherency and smoothness of the 1.7s.

 

This is a clear demonstration of the inadequacies of the Magnepan crossovers. One problem with the 3.6r is that the midrange driver is wired out of phase. Peter Gunn crossovers make Magnepan drivers more coherent. He will provide the schematic for free, but it requires modification to the speaker wiring.

 

Also, the Magnepan 3.6r has full ribbon tweeter, quasi-ribbon midrange and magnetic planar bass drivers.

13.3" MacBook Air, 4GB RAM, 256GB SSD; iTunes/Bit Perfect; MacBook Air SuperDrive; Western Digital My Book Essential 2TB USB HD; Schiit Bifrost USB DAC; Emotiva USP-1, ERC-1 and two UPA-1s; Pro-Ject Xpression III and AT440MLa; AKAI AT-2600 and Harman Kardon TD4400; Grado SR80i; Magnepan MMG Magnestands; and, Rythmik Audio F12

Link to comment
  • 3 weeks later...

1.7's and a good sub.

 

That being said, I've had the MMG, 1.6's, 3.6's, etc....and I finally got our of the Maggie line all together. The sweet spot is incredibly small. I've gone in a completely different direction with the Mirage OMD-28's and couldn't be happier. The sweet spot is HUGE. Incredible sound stage and depth. If you listen to music by yourself and watch movies by yourself, and plan on never (or rarely) having anyone else join you, then you can calibrate your seating position for the Maggies. If you have friends...look elsewhere! :)

 

 

Mike

Just my two cents....as a longtime former Maggie owner/fan.

Link to comment
  • 8 months later...

I am considering buying the 1.7's and already have a sub: Rel Strata III. Is this sub considered good enough for them?

 

The other day I heard the 1.7 without sub and something was missing. Then the seller added a sub and things started making sense. Today I heard the 3.6 but, even though there was enough bass, the sound was not so clean and crystalline and they didn't play so well at low volumes, and tended to get confused when I increased the volume (maybe the latter was the amp's fault).

 

So my questions are:

- is my Rel Strata III a good companion for 1.7?

- I heard class-d amps are the best for these speakers. would you agree?

 

Thanks,

Nuno

Link to comment
1. Is my Rel Strata III a good companion for 1.7?

2. I heard class-d amps are the best for these speakers. would you agree?

 

1. The REL Strata III should be an adequate subwoofer for use with the Magnepan 1.7. However, bass management facility in an integrated amplifier or preamplifier would allow better integration of the two.

2. Absolutely not. It depends on the unit. Both Class A/B and Class D amps can sound good with Magnepans. The key to amplification for Magnepans is high current and 4 Ohm capability.

13.3" MacBook Air, 4GB RAM, 256GB SSD; iTunes/Bit Perfect; MacBook Air SuperDrive; Western Digital My Book Essential 2TB USB HD; Schiit Bifrost USB DAC; Emotiva USP-1, ERC-1 and two UPA-1s; Pro-Ject Xpression III and AT440MLa; AKAI AT-2600 and Harman Kardon TD4400; Grado SR80i; Magnepan MMG Magnestands; and, Rythmik Audio F12

Link to comment
Can you explain what you mean by bass management facility? Is this a specific functionality of the amplifier? Can you give me an example?

 

Thanks,

Nuno

 

While a subwoofer usually has a low pass filter to configure its output frequencies below a certain value, they rarely have a variable high pass filter to send frequencies above a certain value to the loudspeakers. Some subwoofers have loudspeaker terminals but have a fixed high pass filter, often 80 Hz. Hence, integrated amplifiers, receivers and preamps with bass management facilities will provide, at a minimum a subwoofer output jack, and all the way up to both variable low pass filtering on the subwoofer output and variable high pass filtering on the loudspeaker outputs. I have an Emotiva USP-1 preamplifier which I have set the low pass filter for the subwoofer output at 50 Hz and the high pass filter output which goes to the power amp for my loudspeakers also at 50 Hz. So my Magnepans and Rythmik subwoofer are able to do what they do best.

13.3" MacBook Air, 4GB RAM, 256GB SSD; iTunes/Bit Perfect; MacBook Air SuperDrive; Western Digital My Book Essential 2TB USB HD; Schiit Bifrost USB DAC; Emotiva USP-1, ERC-1 and two UPA-1s; Pro-Ject Xpression III and AT440MLa; AKAI AT-2600 and Harman Kardon TD4400; Grado SR80i; Magnepan MMG Magnestands; and, Rythmik Audio F12

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...