Jump to content
  • The Computer Audiophile
    The Computer Audiophile

    Peachtree Audio DAC•iT Review (AKA DACiT)

    dacit-thumb.jpgI'm not a big fan of blind listening tests. I rarely put myself through blind tests when reviewing products. My standard reviewing methodology is to listen to familiar components for a few hours, or even days, then place the piece of reviewed gear into the system. No matter the price difference between the components I can at least identify sonic differences as a starting data point. Sonic differences are much easier for me to identify after long listening sessions as opposed to short A/B type sessions. After listening to my system for a few hours I switched preamp inputs to hear what the Peachtree Audio DAC•iT had to offer compared to other components. I was immediately and thoroughly impressed by the DAC•iT's performance. There were no glaring and easily identifiable deficiencies. This first impression had such an impact on me that I conducted a blind listening test between components costing thousands of dollars and the paltrily priced Peachtree Audio DAC•iT at $449. The unscientific blind, and sighted, test results were unflattering of my ability to differentiate between these components over a short period of time. Following prolonged listening I was able to identify a couple small imperfections in the DAC•iT but not a single showstopper. Peachtree Audio's DAC•iT is an overachiever that has definitely out-punted its coverage.

    [PRBREAK][/PRBREAK]

     

     

     

     

     

     

    <center><img src="http://images.computeraudiophile.com/graphics/2011/1214/PeachtreeDACiT.jpg"></img></center>

     

     

     

    <b>DAC•iT - Not DACiT, DAC-iT, or DAC-$#!T</b>

     

    The DAC•iT is Peachtree Audio's least expensive Digital to Analog Converter. The unit is without bells, whistles, and audiophile grade gold plating. The DAC•iT has a surprisingly nice fit and finish for a $449 high performance audio component. The metal chassis rests on a sensibly designed rubber bottom so as not to scratch the component or the supporting structure. There are four buttons on the front panel, all of which illuminate upon selection. One button for power and the remaining three buttons to select the appropriate digital input. Peachtree Audio wisely designed the buttons without needless over-engineering. I've used components in the recent past with buttons that looked great and lit up like a Christmas tree but were simply unacceptable for daily use. Operating the DAC•iT's buttons requires a simple push of a finger. The ease of use and corresponding light leave no ambiguity as to whether or not the button has been properly selected. Trust me I am not making something out of nothing. Readers willing and able to attend CES in January should walk the Venetian halls and press a few buttons on the components. Some designers outsmart themselves with overcomplicated buttons. Peachtree Audio has always been prudent with its designs.

     

    As Peachtree Audio's base DAC the DAC•iT doesn't offer everything, it simply offers enough for many listeners. Three digital inputs covering coaxial S/PDIF (electrical), TosLink S/PDIF (optical), and USB are enough inputs for a number of different listening scenarios. I can think of five great uses off the top of my head, AppleTV, Squeezebox, Sonos, PC/Mac, and a server such as the Aurender S10. One of the main uses Peachtree envisioned when designing the DAC•iT was to pair it with components like a Sonos, AppleTV, or Squeezebox. The DAC•iT enables users to upgrade the sound quality substantially in one or more zones without replacing the complete system or spending a small fortune.

     

    The DAC•iT doesn't offer analog input, volume control, or balanced XLR analog output. None of this should be a surprise to astute Computer Audiophile readers. The chances are very high that DAC•iT users have a volume control elsewhere in their systems whether digital through a Squeezebox or analog through a preamplifier. As the name implies the DAC•iT is a DAC, that's it.

     

    Internally the Peachtree Audio DAC•iT offers a more robust analog output stage compared to nearly all streaming devices. It also makes use of the highly praised ESS Sabre 9022 DAC chip. Part of the Peachtree Audio mantra is its components use great ESS chips as one critical piece in components designed for use in computer audio systems. Peachtree uses the ESS Sabre 9022 to re-clock all incoming digital signals. According to Peachtree Audio's David Solomon this re-clocking in combination with transformer coupled digital inputs, including USB galvanic isolation, play a much greater role in a DAC's sound quality than its USB transfer mode (adaptive or asynchronous). I don't completely agree with David's assessment as I believe asynchronous USB is required for reference quality USB DACs to reach the highest levels of performance. Even though the DAC•iT is an adaptive USB design, as is the Stereophile Class A rated Peachtree iDAC ($999), Peachtree Audio hasn't shunned asynchronous USB all together. Peachtree Audio's new Grand Pre ($2,999) offers an asynchronous USB input. However, Peachtree says async is used more because of consumer demand than greater performance.

     

    Included with the Peachtree Audio DAC•iT are a switch mode power supply and a remote control with discreet input selection.

     

     

     

    <b>The Daily DAC(•iT)</b>

     

    Peachtree Audio's DAC•iT is not only a great component for streaming based systems but nearly all types of computer audio systems. I used the DAC•iT with my <a href="http://www.computeraudiophile.com/content/Computer-Audiophile-Pocket-Server-CAPS-v20">C.A.P.S. v2.0</a><a href="http://www.computeraudiophile.com/content/Computer-Audiophile-Pocket-Server-CAPS-v20"><img src="http://images.computeraudiophile.com/ca/icons/ex.png" style="padding: 0pt 0pt 0pt 3pt;" alt="link"></img></a> server and the Aurender S10 music server for most of the review period. Using the C.A.P.S. v2.0 server with J River Media Center 17 I thoroughly tested each digital input to determine the supported sampling frequencies and audio output modes.

     

    Inputs & Sampling Frequencies

    <ul><li>USB -> Supports 44.1, 48, and 96 kHz. Does not support 88.2, 176.4, or 192 kHz.</li>

    <li>TosLink S/PDIF (optical) -> Supports 44.1, 48, 96, and 192 kHz. Does not support 88.2 or 176.4 kHz.</li>

    <li>Coaxial S/PDIF (electrical) -> Supports 44.1, 48, 88.2, 96, 176.4, and 192 kHz.</li></ul>

     

    Audio Output Modes

    <ul><li>WASAPI - Event Style -> Worked without issues.</li>

    <li>WASAPI -> Worked without issues.</li>

    <li>ASIO -> Unsupported.</li>

    <li>Kernel Streaming -> Problems changing tracks, static.</li></ul>

     

     

    Listening to the $449 DAC•iT was real pleasure. I frequently enjoy items more, whether audio related or not, when they are such an incredible deal. The entire review period I thought to myself, this thing is such a guilt free purchase for music lovers and audiophiles alike. Many CA readers likely have more money invested in their remote control (iPad).

     

    The more hours I put on the DAC•iT the more familiar I became with the device. I enjoyed all types of music through the unit but enjoyed rock and jazz more than the other genres. There was something about solo horns and the complete horn sections of my favorite jazz recordings when played through the DAC•iT. The horns sounded so appealing as if they were jumping out of my TAD CR1 loudspeakers and into my lap. Throughout the review I had two albums in heavy rotation. First, the newest version of The Dave Brubeck Quartet's Time Out (<a href="http://www.nomp3s.com/Time_Out_K2hd_p/886978835321.htm">2011 Sony K2HD Master</a><a href="http://www.nomp3s.com/Time_Out_K2hd_p/886978835321.htm"><img src="http://images.computeraudiophile.com/ca/icons/ex.png" style="padding: 0pt 0pt 0pt 3pt;" alt="link"></img></a>), second Harry James and His Big Band The King James Version (<a href="http://www.sheffieldlab.com/sheffield.pl?detail=SL10068">Sheffield Lab</a><a href="http://www.sheffieldlab.com/sheffield.pl?detail=SL10068"><img src="http://images.computeraudiophile.com/ca/icons/ex.png" style="padding: 0pt 0pt 0pt 3pt;" alt="link"></img></a>). The horns on both 16 bit / 44.1 kHz albums were fantastic through the DAC•iT.

     

    <img src="http://images.computeraudiophile.com/graphics/2011/1214/dacit-black-thumb.jpg" style="padding: 5pt 10pt 7pt 5pt;" align="left">24 bit / 96 kHz rock music from Pink Floyd was also on the DAC•iT review menu. Both The Dark Side of the Moon and Wish You Were Here sounded great. The bass was as wall-shaking as it should be during Welcome to the Machine. David Gilmour's infamous cough, sniff, and deep breath at the beginning of Wish You Were Here were very evident and the opening guitar solo was as lifelike as I've ever heard through such an inexpensive component. In fact, I'd put DACs worth thousands of dollars more than the DAC•iT up against this thing and expect very little difference. Oh wait, I already did. At any given time I have ten or more DACs in my listening room for review, evaluation, or simply my listening pleasure. I don't want to embarrass any manufacturer or unduly influence people not to purchase a product they truly enjoy. Plus, my results are valid only in my system, in my room, with my ears, on the days I listened to the DAC•iT. Therefore I'll withhold the details of my comparisons. The takeaway from this should be to audition a DAC•iT in addition to much more expensive DACs. There's no right answer or correct selection. It all comes down to what people like.

     

    No DAC is perfect and certainly not a $449 DAC. Design compromises must be made to keep the price reasonable. I found three main imperfections with the DAC•iT after listening and comparing for many hours. There is a strong likelihood these imperfections wouldn't be noticed by listeners without other high performance DACs on hand for comparison and certainly not by listeners upgrading devices like the AppleTV, Sonos, and Squeezebox.

     

    Low level resolution was not on par with my best DACs, but was certainly better than any DAC I've heard around this price range. Listening to the Dallas Wind Symphony Crown Imperial track 8 Michael Daugherty: Niagara Falls at <a href="https://www.hdtracks.com/index.php?file=catalogdetail&valbum_code=HD030911111229">24 bit / 96 kHz</a><a href="https://www.hdtracks.com/index.php?file=catalogdetail&valbum_code=HD030911111229"><img src="http://images.computeraudiophile.com/ca/icons/ex.png" style="padding: 0pt 0pt 0pt 3pt;" alt="link"></img></a> required a major volume adjustment to hear the low level details present in the recording. This track has almost no dynamic range compression and a <a href="http://images.computeraudiophile.com/graphics/2011/1214/dr17.png" class="thickbox" rel="dr17">dynamic range score of 17</a><a href="http://images.computeraudiophile.com/graphics/2011/1214/dr17.png"><img src="http://images.computeraudiophile.com/ca/icons/ex.png" class="thickbox" rel="dr17" style="padding: 0pt 0pt 0pt 3pt;" alt="link"></img></a>. The track requires very resolving systems to bring out every detail without adjusting the volume up and down for quiet and loud passages respectively. This leads me into my next imperfection, a slightly rolled off very top end. Listening to the same track through the DAC•iT there was a tiny lack of detail at the very top. This track has information all the way to 35 kHz. There's no way I can come close to hearing that high of a frequency. The highest audible frequencies lacked a crispness that was present through my other available and much more expensive DACs. The last imperfection I found with the DAC•iT was an every so slight thickness in male vocals. Listening to Ray LaMontagne's God Willin' and the Creek Don't Rise tracks 5. Are We Really Through, and 6. This Love Is Over were just a skosh more chesty than through the other more expensive DACs in my comparison. Again, I want to stress not a single one of these imperfections is a showstopper.

    <center>Click To Enlarge</center>

    <center>Dallas Wind Symphony Crown Imperial track 8. Michael Daugherty: Niagara Falls</center>

    <center><a href="http://images.computeraudiophile.com/graphics/2011/1214/daughterty-freq.png" class="thickbox" rel="daugherty"><img src="http://images.computeraudiophile.com/graphics/2011/1214/daughterty-freq-700.png"></a></center>

     

     

     

     

    <b>Conclusion</b>

     

    <a href="http://images.computeraudiophile.com/ca/cash-logo-black.png" class="thickbox" rel="cash-ma-1"><img src="http://images.computeraudiophile.com/ca/cash-logo-black-thumb.jpg" style="padding: 2pt 10pt 5pt 2pt;" align="left" alt="CASH-List"></a>

    The Peachtree Audio DAC•iT is not without faults but is with many attributes of much more expensive DACs. In fact I am so impressed by the DAC•iT, it's now the least expensive DAC ever placed on the <a href="http://www.computeraudiophile.com/content/Computer-Audiophile-Suggested-Hardware-List">C.A.S.H. List</a><a href="http://www.computeraudiophile.com/content/Computer-Audiophile-Suggested-Hardware-List"><img src="http://images.computeraudiophile.com/ca/icons/ex.png" style="padding: 0pt 0pt 0pt 3pt;" alt="link"></img></a>. The sound quality available through this DAC may fool even the most knuckle dragging, card carrying audiophile in a short term blind or sighted listening test. I encourage readers to find another DAC of this quality anywhere near this price. The DAC•iT is not for listeners who require analog input(s), balanced analog outputs, or volume control. The DAC•iT may be the component of choice for readers seeking a low cost, high performing, overachieving DAC from a company created solely to meet the needs of computer audiophiles. The DAC•iT is highly recommended.

     

     

     

     

     

     

     

     

     

     

     

     

     

    <center>Click To Enlarge</center>

    <center><a href="http://images.computeraudiophile.com/graphics/2011/1214/DAC.iT.Back.jpg" class="thickbox" rel="dac-it-back"><img src="http://images.computeraudiophile.com/graphics/2011/1214/DACiT700.jpg"></a></center>

     

     

     

     

     

     

     

     

     

     

     

     

     

    <b>Product Information</b>:

    <ul>

    <li>Product - Peachtree Audio DAC•iT</li>

    <li>Price - $449</li>

    <li>Product Page - <a href="http://signalpathint.com/index.php/DAC-iT/dacit.html">Link</a><a href="http://signalpathint.com/index.php/DAC-iT/dacit.html"><img src="http://images.computeraudiophile.com/ca/icons/ex.png" style="padding: 0pt 0pt 0pt 3pt;" alt="link"></img></a></li>

    <li>Where To Buy - <a href="http://signalpathint.com/index.php/Dealers/">Link</a><a href="http://signalpathint.com/index.php/Dealers/"><img src="http://images.computeraudiophile.com/ca/icons/ex.png" style="padding: 0pt 0pt 0pt 3pt;" alt="link"></img></a></li>

    <li>User Manual - <a href="http://files.computeraudiophile.com/2011/1214/Dac-it%20Manual2(V17).pdf">Link (PDF 2.3MB)</a><a href="http://files.computeraudiophile.com/2011/1214/Dac-it%20Manual2(V17).pdf"><img src="http://images.computeraudiophile.com/ca/icons/ex.png" style="padding: 0pt 0pt 0pt 3pt;" alt="link"></img></a></li>

    </ul>

     

     

     

     

    <b>Associated Equipment</b>:

    <ul>

    <li>Source: <a href="http://www.aurender.com/">Aurender S10</a>, <a href="http://www.computeraudiophile.com/content/Computer-Audiophile-Pocket-Server-CAPS-v20">C.A.P.S. v2.0 Server</a></li>

    <li>Remote Control Software: <a href="http://itunes.apple.com/us/app/aurender/id426081239?mt=8">Aurender iPad App</a>, <a href="http://www.bitremote.com/">BitRemote</a></li>

    <li>Remote Control Hardware: <a href="http://www.apple.com/iphone/">iPhone 4</a>, <a href="http://www.apple.com/ipad/">iPad</a>, <a href="http://www.apple.com/macbookair/">MacBook Air</a></li>

    <li>Playback Software Windows 7: <a href="http://www.jriver.com/">J River Media Center 17</a></li>

    <li>DAC: <a href="http://www.berkeleyaudiodesign.com/">Berkeley Audio Design Alpha DAC Series 2</a>, <a href="http://www.berkeleyaudiodesign.com/">Berkeley Audio Design Alpha USB</a></li>

    <li>Preamp: <a href="http://www.audioresearch.com/LS27.html">Audio Research LS27</a>, <a href="http://tad-labs.com/en/consumer/c2000/">TAD Labs C2000</a>, <a href="http://www.emmlabs.com/html/audio/pre2/pre2.html">EMM Labs PRE2</a></li>

    <li> Amplifier: <a href="http://www.belcantodesign.com/Belcanto_Ref1000M_Amplifier.html">Bel Canto Design ref1000m</a>, <a href="http://www.mcintoshlabs.com/us/Products/pages/ProductDetails.aspx?CatId=Amplifiers&ProductId=MC275">McIntosh Labs MC275</a></li>

    <li>Loudspeakers: <a href="http://tad-labs.com/en/consumer/cr1/">TAD Labs CR1 Compact Reference</a></li>

    <li>Cables: <a href="http://www.audioquest.com">AudioQuest Redwood Loudspeaker Cable</a>, <a href="http://www.audioquest.com">AudioQuest Niagara Balanced XLR Analog Interconnects</a>, <a href="http://www.mogamicable.com/category/bulk/dig_interface/aes_ebu/">Mogami W3173 Heavy Duty AES 110 ?</a>, <a href="http://www.audioquest.com">AudioQuest NRG-100 Power Cables </a>, <a href="http://www.wireworldcable.com/products/107.html">Wire World Silver Starlight USB Cable</a>, <a href="http://www.audioquest.com">AudioQuest Diamond USB Cable</a>, <a href="http://www.kimber.com/products/interconnects/digital/select/ks2020/">Kimber Select KS2020 S/PSIF Coax Cable</a>, Generic TosLink S/PDIF Optical Cable</li>

    </ul>

     

     

     

     

     

     

     

     

     




    User Feedback

    Recommended Comments



    I'm new to the world of computer audio, and am extremely grateful that you have created this wonderful website. It has helped me more than any other source of computer audiophile information I have found.<br />

    <br />

    Thanks also for the wonderful review of the Peachtree DAC•iT. I pre-ordered the DAC•iT, and am very pleased with it. Since it is my first DAC, I had no way of judging its performance compared to others, so your review is of special value to me.<br />

    <br />

    I have a few questions I hope you can answer. If my understanding of how this stuff works is flawed, please let me know.<br />

    <br />

    I am using the DAC•iT's USB input, which apparently does not support 88.2 kHz. Unfortunately, many of the files available through HDTracks and other download sites are 24/88.2, not 24/96. I don't know what happens to the sampling rate when I play 24/88.2 files through the DAC•iT. Could you explain how the DAC•iT treats 88.2 files?<br />

    <br />

    Do you think it would be worthwhile to buy a coaxial S/PDIF bridge in order to take advantage of the DAC•iT's coaxial input which does not have the same sampling rate restrictions? I'm thinking one of the V-Link products, but again, I don't know which of the three (original V-LINK, V-LINKII, V-LINK192) would give me the most bang for the buck.<br />

    <br />

    I am using J. River Media Center 16 to play the files.<br />

    <br />

    Any information you could provide would be greatly appreciated, since I live over 150 miles from the nearest audiophile store.<br />

    <br />

    Flailing in the audiophile ether,

    Share this comment


    Link to comment
    Share on other sites

    If the Dac-It accepts the file with no qualms it probably upsamples it to 96 automatically, or downsamples it to 44.1. I don't know if upsamples is the right term when going from 88.2 to 96 as it normally refers to doubling of the bitrate, but I know that whatever it's called, it is done.<br />

    <br />

    However, I think there's an option in JRiver that allows you to specify what you want to do with the sample rates of files, whether to upsample/downsample to specific rates.<br />

    <br />

    Although as I understand it, it is better to double bitrates as opposed to going from 88.2 to 96, in real life it probably makes very little difference unless you have an incredibly resolving system. So I'm guessing that if you go with a converter just for that reason you probably won't notice much. However, if the coax input on the Dac-It is known to be significantly better than the usb, which is sometimes the case, then it's another story.<br />

    <br />

    You might see if you can find a review of the Dac-It or maybe someone here will be able to compare the usb and coax sound.<br />

    <br />

    -Chris

    Share this comment


    Link to comment
    Share on other sites

    I personally preferred the DaciT's coaxial input via MF V-link vs. it's usb. It uses the tenor chip for usb which is good but not as good as coax/optical input quality. I also though the optical quality was very, very good.<br />

    <br />

    There is no difference between V-link I and II. Same insides, just revamped exterior to match their new lineup. The V-link I is only $99 at amazon.

    Share this comment


    Link to comment
    Share on other sites

    Hey Wushuliu,<br />

    <br />

    When you say you prefer the V-link > coax input, what about it sounds better to you? Or what do you like better about it?<br />

    <br />

    -Chris<br />

    Share this comment


    Link to comment
    Share on other sites

    the usb did not have the same level of fidelity. the coax/optical via v-link just had more of everything, depth, transparency, focus, etc. I have used several tenor-based usb dacs and the coaxial inputs were always preferred.

    Share this comment


    Link to comment
    Share on other sites

    Thanks, Chris and Wushuliu,<br />

    <br />

    Both of your answers have helped me to gain a clearer view of the world of computer audio. Your responses will undoubtedly help me make a better informed decision about purchasing a V-Link. I greatly appreciate the generosity of those who post to Computer Audiophile.<br />

    Share this comment


    Link to comment
    Share on other sites

    I'm surprised this is a recommended component when it doesn't handle the 88 sample rate.

    Share this comment


    Link to comment
    Share on other sites

    I'm pretty sure I have played both 88k and 176K files through the Coax connection. :) <br />

    <br />

    -Paul<br />

    Share this comment


    Link to comment
    Share on other sites

    Just finished comparing my recently purchased Musical Fidelity M1DAC with the Peachtree Audio DACiT. I figured I could compare both and return the one I didn't want. I was hoping the Peachtree would be as awesome (for the price) as it sounded in this review, because it would save me a couple hundred off the M1DAC. While the Peachtree may have a somewhat more melodic low end, that is about its only redeeming quality, as compared to the Musical Fidelity M1DAC. The high end of the M1DAC is vastly superior to the DACiT, bringing to life elements in the music that are practically non-existent in the DACiT. And the soundstage of the M1DAC is far more spacious, filled with clarity and depth. The only fault I find in the M1DAC is that it is lacking somewhat in the warmth typical of high definition music (most of my music is ALAC CD quality). I've found the perfect solution for adding warmth, however, by using the M1DAC in conjunction with the Channel D Pure Music audio player for Macs. I let the Pure Music player upsample the music to 96khz, then the M1DAC takes it the rest of the way, upsampling to 192khz. I'm not sure if it's the upsampling that makes the difference, but these two upgrades make a world of difference when combined. If you're into the high, treble end of music, and trying to live within the relatively lower range of DAC's, I recommend comparing these two before making a decision.

    Share this comment


    Link to comment
    Share on other sites

    Yes, true, the coax does 88k/176, but I was mainly talking about the USB input :)

    Share this comment


    Link to comment
    Share on other sites

    Hey Rich - I returned the M1DAC-A for almost exactly the same reasons you returned the DAC*IT. <br />

    <br />

    I also compared the Rega DAC, which is highly thought of in comparisons with these two. I would suggest adding it to your list of DACS to compare too. <br />

    <br />

    Ain't it kinda cool how different we all are?<br />

    <br />

    And we all have such a wide variety of choice? :) <br />

    <br />

    -Paul<br />

    Share this comment


    Link to comment
    Share on other sites

    Chris - thanks for an excellent review. I am an absolute newbie to this stuff. I have an ipod and Beyerdynamic DT-440 Headphones. All of my music currently resides on my work laptop as my home PC died a smoky death. I will be building a new PC at some point in the near future. <br />

    <br />

    I would really love to get the iNova/D5 speaker combo, but it's just not in the budget at the moment. The DACiT appears to be an excellent choice for the price. I will probably be doing more headphone listening at this point anyway. What would you recommend as a good headphone amp to go along with the DACiT? <br />

    <br />

    I have been perusing the site for a while and it is a great source of information. Thanks!

    Share this comment


    Link to comment
    Share on other sites

    Hi CrimsonLake, and Welcome.<br />

    <br />

    I have the V-Can made by Musical Fidelity. It's part of their high quality but inexpensive no frills line (in terms of appearance) and I'm very satisfied with it. I use it with their V-Dac as well as with a NOS Dac. I don't have the Dac-It so I can't say how it would go with it, but I imagine it should do quite nicely. <br />

    <br />

    When you're thinking of what amp to use, I'd probably be more concerned with the amp/headphone matchup than anything else.<br />

    <br />

    The V-Can can drive most any phones. It's not portable, but a nice thing about it is that it has stereo line outs so it will allow your dac to connect to your main amp/preamp too.<br />

    <br />

    -Chris (not the Chris)<br />

    <br />

    Share this comment


    Link to comment
    Share on other sites

    Great review.<br />

    <br />

    I circled through several DACs and ended up with the V-DAC II.<br />

    <br />

    Pure Music >> MAC >> USB >> V-DAC II >> Amplification >> Transponders.<br />

    <br />

    Hard to believe it could get a ton better.<br />

    <br />

    Share this comment


    Link to comment
    Share on other sites

    Just got my first outboard DAC. I just stumbled to this site and read a lot of information already regarding high resolution music.<br />

    <br />

    I really like to listen to a nice sounding music. First download files from HDtracks: Eagles and Cat Stevens.

    Share this comment


    Link to comment
    Share on other sites

    Try The Lindemann USB-DAC 24/192 (XMOS chipset)and compare to any of these. It will dust them. And it it 100% made in Germany Not China.<br />

    <br />

    Its XMOS-DSP chipset USB Audio Class 2 performance and all three inputs are capable of handling signals up to 24/192. Most budget DACs like DAC-IT and rDAC hace class 1

    Share this comment


    Link to comment
    Share on other sites

    @aavaaz, Have you listened to most of these dustee candidates? And how much is that German dust rag?<br />

    <br />

    -Chris

    Share this comment


    Link to comment
    Share on other sites

    The Lindeman is about twice the cost of the rdac.990USD.but then it is has anodized machined aluminuim boby not cast aluminium and is made in Germany. It also uses the highest quality/grade Wolfson processsor available, WM8742. I noticed "no jitter" and the music was warm as though you were listening to viynl. I can only comment on the ones i used and then returned them and bought Lindemann. They were rdac with onkyo nd-s1 combo, Dacmagic2 (worst) and Dac-it. Dac-it is not as good as rdac nomatter what.<br />

    <br />

    Now please take my comments with a grain of salt as human ears are highly subjective and a lot depends on the rest of your equipment.My speakers are B&W CM9s with PM8004.The rdac was very, very good but not as good as the lindemann and t he price reflects that. The USB in the rdac is NOT isolated, Lindeman has all inputs isolated. I think for the amount of work Lindmann has done on this puppy, the price is very reasonable.

    Share this comment


    Link to comment
    Share on other sites

    <br />

    Chris great review. I ordered one waiting tor delivery.<br />

    Both your review and the peachtree manual list the 9022 chip.<br />

    Peachtree lists the 9023 chip on their specs.<br />

    which chip is it. Did peachtree change to a cheaper chip. The 9023 is not 32 bit but 24 bit.<br />

    By the way have you looked at the M2 TECH HIGHFACE 1 OR new highface 2 USB to spdif converter

    Share this comment


    Link to comment
    Share on other sites

    Purchased and put the Peachtree DACit on line about 2 weeks ago. I did so based on Chris' review (about as non biased as allowed by the subject matter), and I have not been disappointed. If you don't want, or don't have several thousand dollars for a DAC, but want to "approach" that kind of performance this DAC will do that.<br />

    <br />

    I started with a USB (Pangea) configuration, but wanted to be able to play 88.2, 176.4, and 192 KHz recordings as well. I was lucky enough to have an ASUS Xonat ST card around which I've used S/PDIF coax to bridge the pc and the DAC. The coax seems noticeably superior to the USB configuration. And yes, the Asus Xonar will pass 88.2 and 176.4 with coax (see recent forum entry or Chris' review). Don't skimp on a marginal coax cable.<br />

    <br />

    As far as this DACs frequency reaponse and the quality of it's output, try Karunish; "Call of the Mystic", Ancient Voices, assuming your other components and speakers are up to the task, and you'll hear all you want to know. <br />

    <br />

    Jim

    Share this comment


    Link to comment
    Share on other sites

    Here is a very robust 9v linear power supply for only $50 (!). Originally designed for the Teralink X1 and X2, these have been used with other products and are popular on other forums. The seller has been around for a while and also sells a silver DC power cord for use with the power supply.

     

    I am sure an equivalent PS would cost 5-10X from any audiophile company/vendor.

     

    http://www.ebay.com/itm/Teralink-X2-X1-U9VA-Linear-Low-noise-Power-Supply-/260908993850?pt=LH_DefaultDomain_0&hash=item3cbf634d3a#ht_2235wt_905

    Thank you, wushuliu, for the find and the recommendation. I bought the TeraDak U9AV Power Supply through the link you provided.

     

    It arrived recently, but it was marked as 230V, even though I specified a 115V model. Since I know virtually nothing about electronics, I took the unit to a local electronics repair person for review. He was able to move a jumper within the unit to change it to 115V. He said good quality parts were used and it's well built. I am using a generic AC power cable (not included), and the supplied DC cable. The power supply has its own ON/OFF switch.

     

    I put the unit in play last night, powering my DAC*iT. I was immediately struck by increased definition of the bass. The bass also seemed deeper and the soundstage larger, with more space (air?) around individual instruments. So far, after only a few hours of listening time, I am glad I made the purchase.

     

    However, I need some advice.

     

    The power supply provided by Peachtree has no ON/OFF switch. The ON/OFF switch on the DAC*iT is labeled 'Standby', and is lit with a green light when the switch is in 'Standby' (off) mode.

     

    Would it be preferable to keep the new power supply on 24/7 to allow the DAC*iT to remain in 'Standby' mode, or can the power to the DAC*iT be turned off completely between listening periods? My primary concern is for the operational health of the DAC*iT.

    Share this comment


    Link to comment
    Share on other sites




    Guest
    This is now closed for further comments




×
×
  • Create New...