Jump to content
  • The Computer Audiophile
    The Computer Audiophile

    AudioQuest DragonFly Review

    thumb.pngThe word Value is frequently mentioned in high end audio product reviews no matter what the product under review actually costs. Value is incredibly subjective. I often cite my Berkeley Audio Design Alpha DAC Series 2 as a great value at $5,000. My non-audiophile friends would likely cite off-brand $5 iPod replacement headphones designed and assembled in China as a great value. The EMM Labs DAC2X I'm currently captivated by costs $15,500. It's the best DAC I've heard in my listening room to date. Labeling the DAC2X as a value is a much more difficult task for me even though its performance is outstanding. Rarely is a product introduced that meets nearly every audiophile's definition of value. I can't even think of such a product in recent memory. This year AudioQuest released what I consider the highest value product I've ever used, the $250 DragonFly DAC / Headphone Amp. In addition to my opinion about the DragonFly's value it's pretty clear an overwhelming number of vocal DragonFly owners agree that this product sets a new standard for high value. The DragonFly costs little, performs large, and belongs in virtually every holiday gift basket in 2012.

     

     

    Dragonfly-DAC-700px.png

     

     

     

     

    Tiny and Mighty

     

     

    The AudioQuest DragonFly is to high end audio what Tiny Mighties® Magnets ex.png are to a refrigerator. Both are very small and pack a big punch. In fact the DragonFly is half the size of the EMM Labs logo on top of the DAC2X. It's crazy to think both the DAC2X and the DragonFly are asynchronous USB DACs but the DF also features analog volume control! Before continuing I must say the DAC2X is a much better DAC that's in another league compared to the DragonFly. I only mention these two DACs together as both the price and size are at opposite ends of the continuum but the sound quality differences between the two are not complete opposites. Plus, such a comparison makes for a review full of suspense. Readers skipping this paragraph are likely scanning this review for the nonexistent sentence where I declare the $250 DragonFly the best DAC ever and far better than the $15,500 DAC2X. Unfortunately the ADD stricken readers will be in a self imposed suspense for quite awhile seeking a conclusion I clearly will not write. One more time for the record, the $15,000 EMM Labs DAC2X is unequivocally in another class above the $250 AudioQuest DragonFly. Anyone attempting to twist these words or read more into this review than what I'm actually saying is simply trolling.

     

    AudioQuest worked extensively with the "Godfather" of high end USB audio Gordon Rankin to design the DragonFly. Internally the DF contains 107 components on a 0.6" x 1.7" four layer board including several regulators and custom capacitors. Externally the DF has only a USB connector, a 3.5mm (1/8") mini jack for analog output, and an illuminated dragonfly to indicate sample rate. Despite its simplistic external design the DragonFly has some advanced features to please both headphone listeners and those using the DAC only. One of the most surprising features of the DF is its digitally controlled 64-position analog volume control. The vast majority of devices anywhere near this price use digital volume control. This 64-position volume control can be used in variable mode where the user adjusts the level up or down based on desired output or the volume control can be set to unity gain in fixed mode. In fixed mode the analog volume control set to its maximum level much the same way as digital volume controls in software applications are set to 100% so as to not reduce bits before outputting a digital signal to a DAC.

     

    A device with both fixed and variable output can be a skosh confusing in systems that already have one or more volume controls. In addition the DragonFly's output is controlled via software which introduces an extra layer of confusion for the unlearned music aficionado. Fortunately a little education can go a long way. Users should understand the DF's analog output level is controlled by the operating system's main volume control. However, things aren't as simple as sliding this main volume control left, right, up, or down. The best way to control volume and maintain audio quality depends on the operating system and the playback application in use.

     

     

    Scenario 1: Mac OS X Computer > iTunes > DragonFly > Headphones

    I recommend setting the iTunes volume to its maximum level and adjusting the audio output level with the main OS X control on the keyboard or the top OS X menu bar. The OS X main system volume is the sole volume control recommended to maintain the best audio quality with the DragonFly. This system volume directly controls the analog attenuator within the DF. Whereas the volume slider within iTunes is only a digital volume control and has no control over the 64-position attenuator in the DragonFly. If the iTunes slider is used to control volume the audio output to the DragonFly will no longer be bit perfect. This is because digital volume controls reduce the number of bits to reduce the output level.

     

    Scenario 2: Mac OS X Computer > iTunes w/ Amarra > DragonFly > Headphones

    Amarra volume control is similar to the iTunes volume control. Therefore I recommend setting the iTunes / Amarra volume to its maximum level and adjusting the audio output level with the main OS X control on the keyboard or the top OS X menu bar. The same as Scenario 1 above.

     

    Scenario 3: Mac OS X Computer > iTunes w/ Pure Music > DragonFly > Headphones

    Pure Music can operate in two different modes. One mode is identical to the above Amarra/iTunes and plain iTunes and the other mode is completely different in that Pure Music forces the iTunes volume slider to control the OS X system volume thus it controls the 64-position analog volume control in the DragonFly. I recommend using this second mode that controls the analog DF volume. To use this mode enter Audio Setup in Pure Music. Make sure AudioQuest DragonFly is selected as the Output Device. Then select the boxes for Volume and Mute to the right of "Allow Device Hardware Control If Supported" (image ex.png). Click Apply Changes at the bottom of the Audio Setup window and Pure Music will restart in the preferred volume control mode.

     

    Scenario 4: Mac OS X Computer > Audirvana Plus > DragonFly > Headphones

    Audirvana Plus is a little different than the other applications. Audirvana Plus is capable of three different modes plus a few different configurations within each mode. The easiest way to get the best sound quality from the combination of Audirvana Plus and the AudioQuest DragonFly is to set the Audirvana Plus Audio Volume preference to DAC only (image ex.png). Once this is set A+ will control the analog attenuation no matter what other volume options are adjusted. To take A+ to another level I recommend enabling the four Audio System references of Exclusive access mode, Direct Mode, Use max I/O buffer size, and Integer mode (image ex.png). once this is complete the Audirvana Plus volume control only adjusts the DragonFly's 64-position analog attenuator without touching the main OS X system volume control. In fact the main system volume control has no effect on the DF in this mode with these options selected.

     

    Scenario 5: Windows Computer > JRiver Media Center > DragonFly > Headphones

    JRiver Media Center on Windows has the ability to control the main operating system volume with the application's volume slider. Thus, JRMC can control the DragonFly's 64-position analog attenuator with this volume slider. I recommend setting JRMC to use this configuration for the best audio quality when using the DragonFly. In the main JRMC window right click the speaker icon to the left of the volume slider. The pop up menu will allow selection of System Volume (image ex.png). Once this is selected the JRMC volume slider controls the DF's analog volume level. It's very simple. While in this configuration area I also make sure the other volume levels are set to 100. To do this I select Application Volume and Internal Volume from the same right click menu and check the slider positions. If they aren't at 100 simply slide the volume over all the way to the right. Then click back to System Volume and make sure the level is far less than 100 as this is the actual volume output level.

     

    Scenario 6: Any computer, operating system, and playback application > Powered Speakers

    All the above information holds true for powered speakers. However, most if not all powered speakers have volume controls of their own. Users will have to experiment with the DragonFly volume control and the speaker's volume control to see which one not only sounds better but which one is most convenient. Many speakers place the volume knob on the rear of a single speaker. This position is far too inconvenient for me. The sound quality would have to be much better for me to consider using a rear volume control.

     

    Scenario 7: Any computer, operating system, and playback application > Preamplifier > Amplifier > Loudspeakers

    There are a couple items to consider when connecting the DragonFly to a preamplifier. First is the DF volume should be set to its maximum level / fixed output position. The methods above are identical for configuring the DF volume for headphones and a preamplifier. Second, both OS X and Windows sounds effects should be directed way from the DragonFly. The following screenshots display this configuration setting on Windows (image ex.png) and OS X (image ex.png).

     

     

    In addition to an advanced volume control the DragonFly features asynchronous Class 1 USB Audio using the Streamlength™ protocol and dual fixed master clocks. This is a big deal. Industry leading asynchronous technology in a tiny $250 DAC was unheard of until the introduction of the DragonFly. What exactly is Class 1 USB Audio? This question recently came up on the CA forum and is one that many people are afraid to ask for fear of looking stupid in front of the world. USB Audio classes are frequently confused with the standard USB protocols such as USB 1.1, 2.0 and 3.0 referred to as Low/Full Speed, Hi-Speed, and SuperSpeed respectively. These USB protocols are what everyone has seen on the labels of external hard drives for many years. USB Audio Classes for the purposes of this review are like a subset of the USB Standard Specifications except the Audio Classes dive very deep into audio playback. Most people recognize the USB Audio Classes by support for different sample rates and the need for device drivers on certain operating systems. USB Audio Class 1 supports up to 24/96 using native device drivers from most operating systems like OS X, Windows, and Linux. USB Audio Class 2 supports up to and over 192 kHz using native device drivers from operating systems like OS X 10.6.4+, and some versions Linux.

     

    The DragonFly's Class 1 USB Audio limitation is good for the most part. Supporting up to 24/96 audio is more than enough for most people. Even better is the fact that the DF can be connected to most relevant operating systems and work immediately with no software installation. Lack of Class 2 USB Audio support isn't the best for people who demand 176.4 and 192 playback but fortunately most applications will simply downsample the audio to a DF supported rate. When downsampling I really like the JRiver Media Center feature that allows users to select the exact incoming sample rate and outgoing sample rate. For example, it's possible to specify all 24 bit / 176.4 kHz tracks be down sampled to 24 / 88.2 for playback through the DragonFly (image ex.png). Call me old-school but I still prefer downsampling to exactly half of the original rate rather than switching to a new sample rate family such as going from 176.4 to 96 kHz. The math is easier behind the scenes and the sound is better in my experience.

     

     

    Learning To Fly

     

     

    dragon-tail-700px.jpgDuring the review period I listened through the DragonFly using both headphones and my main audio system. The two pairs of headphones I used couldn't be more different from each other on all levels. The Ultimate Ears ue11 Pro in ear monitors are tiny and very low impedance ranging from 4 - 50 ohms. The other headphones are the Sennheiser HD600 large open back, over the ear, with a nominal impedance of 300 ohms. The DragonFly was designed to work well with a wide array of headphones and I was determined to put it to the test.

     

    I started with my Sennheiser HD600s and my 15" MacBook Pro Retina running OS X 10.8.2 with Audirvana Plus 1.3.9.10. I clicked through many of my usual tunes such as Leonard Cohen's Going Home, Ottmar Liebert's Not One, Not Two, and Randi Tytingvaag's Red or Dead. Leonard Cohen's deep rich vocal on Going Home sounded terrific with tons of texture and dimensionality as if he was creepily whispering in my ears. The lowest reaches of his voice were very clear, tight and possibly tipped up just a touch. Moving to Ottmar's Not One, Not Two acoustic guitar masterpiece made it evident the DragonFly was great but not the final answer in DAC performance. For the most part Ottmar's acoustic guitar sounded great. The DragonFly's deficiency was evident more so between the notes where space and air should carry the reverb tails away. There was no effortless and natural decay like the $15.5k DAC2X. To this I say so what. There is no free lunch and we can't have it all for $250. Anyone expecting DAC2X performance for DragonFly prices is crazy. Randi Tytingvaag's Red or Dead provided a great opportunity for the DF to shine on female vocals. Not surprisingly the DragonFly reproduced this track and the rest of the album wonderfully. With Audirvana's volume set to -7 dB I had all the volume I needed to reproduce Randi's voice in all its tack sharp detail. The DF also drove the deep and tight bass lines throughout the track very well. I'm a fan of resolution, hence my use of Spectral Electronics, and I could have used a bit more on this album. However, this is far from a showstopper and far from a major strike against the DragonFly.

     

    Moving from my HD600s to Ultimate Ears ue11 Pro custom earphones I was immediately wowed by a blast of bass. I know the ue11s are very bass heavy but never had all the low frequency stars aligned as they did with this combination. My perceived slight increase in bass by the DragonFly along with bass heavy earphones and a tune full of rich bass such as Leonard Cohen's Going Home was a tad too much for my neutral taste. Maybe I should get into sales and market this combination to all the bass-heads thumping at stoplights annoying other drivers in a two block radius. Only joking, I was one of those kids way back in the day. I still have a great car audio system and must admit it can be a lot of fun when used appropriately. I don't want to give the impression that the bass produced by the DragonFly and my ue11 Pro earphones was mainly caused by the DF. The ue11 Pros are bass heavy to begin with and a good headphone amp will simply amplify what's already present in the earphone. This was evident in 90% of the music I listened to with this DF / UE combination. Seal's most underrated track Killer sounded great in both the album and acoustic versions. The same can be said of Glen Hansard's complete Rhythm and Repose album at 24 bit / 96 kHz. The emotion in Glen's lyrics and texture in his voice came through very well. I was pleasantly surprised how well the DragonFly handled the ue11 Pro earphones. It had plenty of juice to drive the low impedance in ear monitors. I had a very different experience using these earphones with the Wavelength Audio Proton (also designed by Gordon Rankin) and don't recommend that combination for serious or casual listening. Depending on one's musical taste the ue11 Pro or similar custom earphones may be a perfect fit for the DragonFly. There was no technical issue with this combination rather a personal distaste for a small portion of the sound on a small portion of my music collection.

     

    Near the end of the review I connected the DragonFly to my main Spectral / TAD / MIT audio system. I figured the target audience for the tiny DragonFly is mobile or laptop users in need of something better, not audiophiles seeking a main system upgrade. I honestly didn't expect too much and thought this configuration was more to check the box that said I at least tried and listened for glaring issues that may be evident. To my surprise the DragonFly really shined in my main system. It sounded better than either of the aforementioned headphone combinations by a long shot. The quality that really stood out was the DragonFly's ability to reproduce reverb tails and decay much better than it had done with my headphones. Granted the DF is nowhere near the EMM Labs DAC2X in this category, but the improvement I heard with the DF at unity gain sending analog audio through a very revealing system was remarkable. This type of improvement should have audiophiles burning through bandwidth on Internet forums rather than arguing over who's Dad is stronger and has better ears to pass a blind listening test.

     

    ap-ottmar-retina.png

     

     

    The $250 DragonFly sounded great on the vast majority of my albums. Keb Mo's track Every Morning, with its simple vocal and guitar, was terrific through the DF on my main system. I also enjoyed Suzanne Vega's Headshots much more through this combination as the signature heavy bass line throughout was nice and tight. Delineation between the individual bass notes and the drums was better with the DF my main system and overall very good through the DragonFly. Two areas where the DF had difficulty were heard on Nat King Cole's The Very Thought of You at 16/44.1 and Reference Recordings' Crown Imperial at 24/96. On the Nat track the DragonFly lost a touch of gloss present in his vocal. The best DACs I have heard reproduce Nat's voice in a lifelike fashion and this gloss is very evident. Not so with the $250 DragonFly. On Crown Imperial the track Niagara Falls can put any component through a torture test with its delicate highs, demanding lows, and wide dynamic range. The DF struggled a bit to reproduce the large wind symphony at times. The individual instruments combined into a melting pot when they should have been in a salad bowl. The sound from the DragonFly was jumbled and the fine details were lost during the complex passages. In the big picture this is a small issue that doesn't really matter for many users. Potential DragonFly customers should think about the music they like and the music that makes up their libraries when considering any product. I'm willing to bet the DragonFly will be exposed to far more and Oasis, Sia, and Coldplay than orchestras, symphonies, and choirs.

     

     

    Conclusion

     

     

    cash-logo-black-thumb.jpgThe AudioQuest DragonFly is certainly the coolest product I've used in recent memory. An asynchronous USB DAC running Streamlength code with a built-in headphone amplifier and analog volume control that is smaller than many USB flash drives. Increasing its coolness factor is the multi-colored LED illuminated dragonfly that indicates the incoming sample rate. Not only is that cool for audiophile geeks it's also cool for the masses trying to show some audio bling with their Beats headphones. In addition to being cool the DragonFly sounds great. The DF flew reproducing the vast majority of music in my collection while only faltering in a few circumstances. Above all the coolness and sound quality is the high value of a great component that retails for $250. I know of no other product that performs this well for so little money. The DF is in the running for Computer Audiophile Product of the Year and is running unopposed for the highest value product ever reviewed on these pages. AudioQuest has successfully targeted both mass and class with the DragonFly asynchronous USB DAC.

     

     

     

     

     

     

    1-Pixel.png

     

     

     

     

     

     

    1-Pixel.png

     

     

     

     

     

     

     

     

    Product Information:

     

     

     

    • Product - AudioQuest DragonFly USB DAC / Headphone Amplifier
    • Price - $250
    • Product Page - Link ex.png
    • Product Manual - Link (4.7MB PDF) ex.png

     

     

     

    1-Pixel.png

     

     

    1-Pixel.png

     

     

     

     

    Associated Equipment:

     

     

     

     

     

     

     

     

     

     

     

     

    1-Pixel.png

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    1-Pixel.png




    User Feedback

    Recommended Comments



    Excellent review. I've been really pleased with mine (paired with my Audioengine A2s).

    Share this comment


    Link to comment
    Share on other sites

    I have the speakers positioned on the desk in such a way that it is a major PITA to use the rear volume control, so after a bit of experimentation, I found a reasonable position (somewhere around 2/3 max gain) for the A2's volume, and now I keep it there, and control playback volume adjustments exclusively via the DF (using the appropriate volume control setting in Audirvana). This lets me control playback exclusively from the keyboard.

     

    The other advantage of doing it this way is I now also have a small (Velodyne microvee) sub in that office system, and the connection goes from DF to sub and pass-through to the A2s. If I were to control the volume of the A2s with the rear volume control knob, it would change the balance of mains to subwoofer. Using the DF analogue volume control solves that problem easily (i.e., it doesn't even arise).

    Share this comment


    Link to comment
    Share on other sites

    Chris:

    Thanks, nice review - well written and cogent.

    Mike

    Share this comment


    Link to comment
    Share on other sites

    What a great review! I love my little Dragonfly, and think it easily outclasses the price competitive DACs. It is outclassed by the more expensive DACs, but when comparing to other $300 DACs, there just isn't a comparison. :)

     

    One question- in the Mac -> iTunes -> Amarra chain, I think you want to set the Amarra volume to zero rather than the maximum volume. I am going on memory here, so I could easily be wrong with that.

     

    Yours,

    -Paul

    Share this comment


    Link to comment
    Share on other sites

    What a great review! I love my little Dragonfly, and think it easily outclasses the price competitive DACs. It is outclassed by the more expensive DACs, but when comparing to other $300 DACs, there just isn't a comparison. :)

     

    One question- in the Mac -> iTunes -> Amarra chain, I think you want to set the Amarra volume to zero rather than the maximum volume. I am going on memory here, so I could easily be wrong with that.

     

    Yours,

    -Paul

     

    Hi Paul - The Amarra volume is tied to the iTunes volume so setting both at 100% does the trick. Is your experience different?

    Share this comment


    Link to comment
    Share on other sites

    Nope, you are 100% right. I was thinking of the volume slider in Pure Music. Sorry for the confusion. (I had to log on to a system and home and check. :)

    -Paul

     

     

    Hi Paul - The Amarra volume is tied to the iTunes volume so setting both at 100% does the trick. Is your experience different?

    Share this comment


    Link to comment
    Share on other sites

    I'm curious about a potential Scenario 8: Any computer, operating system, and playback application > DF (with analogue vol) > Amplifier > Loudspeakers

     

    In my case, I use a Halide Bridge to a Peachtree Nova as a DAC and pre-Amp, and have an external amp (which I built from a kit, fwiw). I have no other inputs to the pre-amp.

     

    The limitations of the Nova DAC compelled me to use a Halide Bridge, and the limits of the Nova amp compelled me to use an external amp. In addition, the Nova DAC doesn't do 88.2kHz and obligatorily up-samples everything to 96kHz.

     

    So if I removed the Halide Bridge and Nova from the signal path, and went directly from mac mini to DF to amp, controlling volume with the analogue vol control, I wonder if it would sound better?

     

    One thing I worry about is impedance-matching going directly from this to my amp, and the other is electrical isolation.

     

    Another worry is that, despite my personality, I occupy a home shared with other family members. I would like to use Audirvana+ to control the volume, with the system volume set to max, etc, but if some other person just turns on iTunes with the volume all the way up, it would probably be a disaster. Having a pre-amp or buffer offers a layer of protection in this respect.

    Share this comment


    Link to comment
    Share on other sites

    I'd love to hear how this works in your system. The DF is 2 Vrms output and "should" work well.

     

    Although I'd be scared about software volume control only even if it's analog :~)

    Share this comment


    Link to comment
    Share on other sites

    I'll give it a shot when I have a chance and am feeling brave.

     

    Meanwhile, how to you think the Dragonfly compares to the Halide DAC HD? Apart from the analogue volume control, they seem like rather similar products.

    Share this comment


    Link to comment
    Share on other sites

    Hi Chris,

     

    Great review. Really appreciate your layout of scenarios. What a terrific guide!

     

    I use scenarios 1 & 3 with my HD580 headphones at my desk (they are older, but reliably enjoyable). Love the versatility, value and performance of this product.

     

    Sending my best from NYC and thank you as always,

    Chris

    Share this comment


    Link to comment
    Share on other sites

    What a wonderful review. I particularly appreciate the versatility and flexibility of the Dragonfly. I'm sure it'll be all things to all people, which is why I'm grateful Chris reviewed various setups. I really like having the Dragonfly with my laptop when I travel. It's a good portable sound upgrade compared to using an iOS device.

    Share this comment


    Link to comment
    Share on other sites

    Chris, I saw a picture of what looks like a Dragontail, is it available now?

     

    If you have tried it out, do you have any comments on it?

    Share this comment


    Link to comment
    Share on other sites

    Great review Chris,

     

    Curious if you could touch on how the DF compares to the Wavelength Proton. I currently use a Proton in my main rig and was considering an upgrade and then moving the Proton to the office for some headphone use - but if the DF offers most (or all?) of the performance of the Proton in a smaller/cheaper package I may need to more seriously look into it.

     

    Any thoughts or preference between using a DF or Proton with headphones? Does the preference change when used in your main rig?

     

    Thanks,

    Simon

    Share this comment


    Link to comment
    Share on other sites

    Hello Cris,

     

    Thanks for your review, another great.

    In fact I already had in mind purchasing the DragonFly in the near feature.

     

    I spend most of my life using a windows laptop and this will be a terrific mate for my trips, if I can find an appropriate headphone for them.

    Which leads to my question: your headphone configuration did not match the results with the system.

     

    Does it mean you think there can be a better solution for the headphones than what you are using, or just that the main rig is so great that you believe no headphone can match it?

     

    Maybe a top-of-the-line Senheiser or Bayerdinamic would be much closer to the precise, effortless dynamics that I believe/imagine you can get with your system, or maybe the DF does not have enough juice to power the big ones...interested to discover that...

     

    (I have listened the TAD's before, are one of my favourite "tradicional" speakers...ones that I know I would live so well with)

     

    Cheers!

    Miguel

     

     

    PS -

    1) I only wish there was a practical way of connecting the DF to my iPod classic.

    Maybe Audioquest can make and iDragonFly for I devices, at lest for the classical ones.

    Share this comment


    Link to comment
    Share on other sites

    Thanks for an informative review.

     

    I'd have liked to see a Scenario 8: Logitech Squeezebox Touch (with Triode's Enhanced Digital Output) > DF > Headphone Amp > Headphones.

     

    Perhaps a PS?

     

    Guido F.

    Share this comment


    Link to comment
    Share on other sites

    Thanks for the great review.

     

    I was just curious if the DragonFly has an EEPROM - can it be flash updated AudioQuest wants to change any settings (i.e. max output gain set to step 60 vs. 64)? I believe my DragonFly is version 1.0c.

    Share this comment


    Link to comment
    Share on other sites

    I have been using mine for several months OS X > Audirvana Plus > DF (using its analog volume control) > Amplifier > Loudspeakers as wgscott suggested.

     

    Works very well. I can't really turn it up anywhere near unity though. I mostly operate it at -12 dB (as indicated by Audirvana player) or less. And I'm using a modest harman/kardan HK 3490 with the jumpers removed so that the output from the DF goes directly into the amplifier section only, bypassing the rest of the unit. I guess that a 125 mW output is rather powerful.

     

    Incidentally, I count 53 volume steps on Audirvana's player from -∞ dB to 0 dB. I believe the DF has 60 analog steps (I believe I recall a post here delineating the rationale for the change from 64). Anyway, does anyone know how the two reconcile the different number of steps? Rounding to nearest? Losing a few steps at the extremes? Something else?

    Share this comment


    Link to comment
    Share on other sites

    I also would like to hear about sound quality vs Wavelength Proton for headphones but more importantly main rig (hooked to a preamp based stereo)

     

     

     

    Great review Chris,

     

    Curious if you could touch on how the DF compares to the Wavelength Proton. I currently use a Proton in my main rig and was considering an upgrade and then moving the Proton to the office for some headphone use - but if the DF offers most (or all?) of the performance of the Proton in a smaller/cheaper package I may need to more seriously look into it.

     

    Any thoughts or preference between using a DF or Proton with headphones? Does the preference change when used in your main rig?

     

    Thanks,

    Simon

    Share this comment


    Link to comment
    Share on other sites

    Thanks for the thorough review, Chris;

     

    Any chance the DF would sub for the iPod Classic or new iPod Touch's internal DAC?

     

    Thanks,

     

    Dan

    Share this comment


    Link to comment
    Share on other sites

    No for the classic. I'm not sure if there is some trick that would allow it to work with the new iPod touch out, but my guess is no. With the iPad, you can use the USB camera adaptor, but you would need a powered USB hub.

    Share this comment


    Link to comment
    Share on other sites

    I'd love to hear how this works in your system. The DF is 2 Vrms output and "should" work well.

     

    Although I'd be scared about software volume control only even if it's analog :~)

     

    Well, I finally got the connector cable (I bought a BlueJeansCable.com connector. Actually $2 more than the lowest-priced Audioquest.)

     

    Briefly, it certainly sounds no worse, and the noise floor is lower. Volume control was not problematic. I could potentially swap out my Peachtree Nova for this thing, which is a bit embarrassing.

     

    The connector cable, however, was defective. No left channel. (I swapped them around to be sure it was the cable, and then tested the cable with my ohm-meter). I think there is a cold solder, but I'll let them deal with it.

    Share this comment


    Link to comment
    Share on other sites

    Well first, size wise, this unit is as small as the $15 "USB Audio Adapters" that have been out awhile, and still sound terrible. Nothing compares to the size.

     

    Sound wise it plays well above class. I have used it via "option 1" for a couple of months now powering first some AudioTechnica ESW10JPN, and more recently the new Sennheiser Momentum headphones. Bulletproof, and the sound is well above my previous DACPort, and Ray Samuels Predator.

     

    Hard to beat for a portable system (mine is MBP, small USB extender {still waiting for a DragonTail}, Dragonfly, and headphone. The DAC/AMP and cord fit well inside the headphone case.

    Share this comment


    Link to comment
    Share on other sites

    Just to let y'all know that the DragonTail is available as of next Friday. It's effectively a Carbon cable extension for the DragonFly.

    Share this comment


    Link to comment
    Share on other sites




    Guest
    This is now closed for further comments




×
×
  • Create New...