dmormerod

I've been running Ropieee for a while but figured I'd maybe try the latest DietPi to see if there's any difference. Before I do, does anyone know If the latest DietPi version includes the correct ASIX driver or do you still need to manually install?

FYI... https://www.techhive.com/article/3545992/tidal-adds-dolby-atmos-music-support-to-its-hifi-service-tier.html#tk.rss_all

I’m not sure if this is even possible and may be a stupid question. But given many DAC’s require the use of a Windows driver in order to achieve their maximum sampling rate, especially DSD, is there a streamer that’s Windows based that would allow the installation of a driver? It appears that all the streamers I see are using some derivative of Linux.

In the midst of competition, all boats rise: https://www.engadget.com/2019/12/12/tidal-hifi-dolby-atmos-music/?fbclid=IwAR04sfCG6Rhq4HPhsHJyYiajx3XlPeTpmqHLG6sasybeOum6rTb5SzkAkrM

FYI in case anyone else hits a similar issue. It looks like the problem was the volume set in Alsamixer. It was set to 25, upping to 100 suddenly means the C52 is now reporting DSD128. Thanks to the guys at Allo Support who helped figure this out.

I have an support ticket open with Sudeep so hopefully it will get sorted. I've tried Ropieee & DietPi, both gave the same result.

Well it's not functioning as there is no sound. But also why would the USBridge support DSD128 and the USBRidge Sig not in my system? That's a backwards step, not an upgrade!

@allo.com - Roon is set to upsample to DSD128 and the USBridge Sig is configured as DSD over PCM in Roon. (Which if memory serves me right is how my USBridge was configured and it played & indicated DSD 128 perfectly)

My USBridge Sig won’t play upsampled DSD. My previous USBridge happily played PCM upsampled to DSD128 into my McIntosh C52. I’ve tried DietPi and Ropieee but no luck. Anyone else able to upsample to DSD? My C52 doesn’t indicate a DSD signal but shows PCM 352.8.

Just received my USBridge Sig and installed my DigiOne Sig. looks like there’s a DietPi update but I also noted the comment about the Ethernet driver. Anyone know if the latest update includes the correct Ethernet driver? Also am I correct in thinking that in order to swap between USB and DigiOne I first need to charger the sound card setting in the Allo GUI before I can change the output device in Roon? If so that seems a tad clunky!

I just received my USBridge sig and installed my DigiOne Sig and unless I’m mistaken in Oder to swap the outputs in Roon you first need to change the soundcard setting in the Allo GUI?

my sd card was corrupt I had to reflash it

Thanks. Done.

I'm assuming they cases are still stuck in customs as I don't see them on the website yet? Any ETA?

Am I right in thinking you can only order just the PCB right now? So no case?