rico25

Good morning, I have an AMD server with a 65W CPU and I had the same startup problem with the Hammond 159J and Taiko DC-ATX converter. I changed to Martin Mugs starter but the problem persisted 🙄 I had a 24 pin ATX on which there were only 23 pins connected, I connected the 24th and the PC started... unless it was my ULPS which heated up and was set up ... 😅

Ordered Thank you 🙂

2 for me rico25

Hi, in the case these chokes improve the SQ and could improve the cold start too, then yes I am interrested in :) Even if, in my case, with no GPU and with net and spdif cards powered by external PSU, I dont see the origin of difficult cold start (65w cpu)

First the switch was only for Extreme owners, but for 2 or 3 days now, the switch, network card and upcoming router can be purchased by everyone :)

Well yes I think it could be this, it is a good suggestion thanks

Hi Nenon, Doesn't change from ryzen 7 3700X, the ULPS without load is 32V :)

Arf, sorry it doesn't help , with my material it works ... Again with my material, I notice that when everything is hot, things are easier (it works properly)

Same thing happened to me, with same material (Nenon V3 + Taiko ATX) I press the "on" button of my server and nothing happened I have to wait for 5mn and finally the server boot on its own It is mysterious but it works :)

Thank you Mike ! :)

I am using Euphony 20220905, when I search for updates, the message is "no update" (channel stable, no feature update, no system update) Is it normal ? I want to update because the web app is very slow and many disconnections (and today no possibility to connect web app with my PC (my smartphone is ok, slow but ok)) Thank you :)

Hi Jean-Michel, Because the ATX connector at Taiko dc/atx side is 6 pins, I would go with 6x (2x3) of 1,5mm or 26 gauge wire, and use the connector you want at lps side (of course that allows 3 big wires) The différences of resistivity of connectors have less impact than the wires :)

Thank you Stefano, the HS-453DX seems to be a nice improvement compared to my HS210 ! If I am not wrong : * mount 2x 4Go of good RAM ( Apacer sodimm RAM 75.B93GJ.G010B) * mount 2x M2 SSD Samsung 860. Need to know if there can be alone, or still need the 2,5" ou 3,5" disc ? * I see PCIe net cards as an option. Does it mean I can mount a Jcat net card ? How to put it in the case ? * desable a maximum of app (as I have done with the hs210) But I need to know how it works, to find out if it is worth putting on good equipments (RAM, M2 SSD, ...) And of course, would it be a better sound quality VS a diy nas or a Melco ?

Thank you Tom for sharing your experience :) "best" for me concerns the sound quality I followed the path of nas fanless then the one of qualitative power supply because each time the sound quality has increased My need is 4 to 8TB of music storage It is true that the configuration of the internet network has an influence. The best results I've had so far are using the streamer's net card to receive the nas (better than going through a switch). I'm not looking for the best value for money but only the best sound quality

Good morning all, Today I have a diy euphony/stylus server that I use with a Qnap hs210 NAS powered by a js2 Uptone (linked in the Jcat Femto Net card of my diy server) (and a Naim NDS as a DAC alone ... yes I am a naimee :) ) In your experience, for music storage, which would be the best between : 1* Fanless NAS with good power supply 2* diy NAS (good power supply, good net card, good M2 nvme cards for OS and for storage (direct to cpu)) 3* Melco N1Z/2EX using direct "player" rj45 output to server thank you in advance for sharing your experience Good day to you !