Jump to content

CraigR

  • Posts

    25
  • Joined

  • Last visited

  • Country

    United Kingdom

Retained

  • Member Title
    Newbie

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. anywaypassible what cinema software is good ?..is power dvd fairly good ?
  2. Well,just had the time of my life trying to setup my new system or should i say the audio through the HDMI of the GPU to the receiver.I tried always possible with the help of anwaypasible and i was about to give up and call it a day.I went through the settings on the AV receiver and found the solution in the HDMI settings.If you come across this yourself switch o the TV in the AV receiver in the HDMI. Well heres to not going bed now and a very long weekend of films and beer .....
  3. [ATTACH=CONFIG]23651[/ATTACH] Thanks very much anwaypasible for your advice and time,good of you to look into the options etc of the possible causes. Just tested and all is coming through fine DTS,DOLBY etc........Perfect. Thanks again Very Kind Regards Craig
  4. I bear now excellent news...:):)....All Fixed The issue was with the receiver setting.When i was going through the settings for the HDMI it was set to TV+AMP,i thought well i only need the amp so i set it to just this.Then in the configuration all the sound settings were there as per picture : It seems as though the graphics card sees the amp as the audio device and the setting that i changed must allow you to take audio from the TV if needed,thats why it only gave me stereo and when TV switched off it seen the AV settings.....
  5. Hi I bear unwell news.. I did a new install on a new hard drive and the 4 NVIDI ports showed again as unplugged.Even when i installed the latest driver they were still there.When i plug the HDMI into my TV it shows samsung,when i plug back into my AV receiver it shows sonyavamp..
  6. Hi Anwaypasible Tried a earlier driver after full clean but still the same.I have a new hard drive here so i am going to do a clean install and hopefully i will have some success.I'm going to crack on with this straight away now.I will let you know first thing tomorrow how this has turned out..hopefully good results,fingers crossed. Thanks so much for your help Very kind Regards Craig
  7. Also When i did the full clean and restarted the PC,before installed the latest driver i checked in the audio devices and the 3 ports unplugged were still showing.
  8. Hi AnwayPasible For the ID again can you let me know how to do this ? Thanks
  9. Hi Ive just ran the tool version 15.7.3.1 in safe mode and reinstalled the latest driver with audio also and everything is still the same in devices playback,3 HDMI ports not plugged in and the 4th is the sony 1 im using ??
  10. Hi You guys are so good giving me this advice etc.I am trying now and will install the driver fresh again with the audio driver.I will update you shortly when finished. Craig
  11. Hi Darren Yes,im using the HDMI on the card.
  12. Would you please be able to let me know how i can do a full clean of the drivers ? Thanks
  13. The output is showing dolby plix11 - linear pcm on ports 1 and 2
  14. Im Rearly confused,I have a creative z card which i bought, this will do Dolby and dts 5.1 but not 7.1 as this is optic. All i want to do is set up the HDMI so i can play the sound through this now and it pick up the different streams etc.
×
×
  • Create New...