A1B

Hi to you all, Though I have been absolutely satisfied with my S1 for two years is is time for me to upgrade. I have put my S1 up for sale together with my L1 library. If you’re interested., please look at my advertisement on hifi.nl. But this is not the reason for my post. Because I have used and sBooster linear PSU to power my L1 for te latest year, I put the original PSU in a storage box where I have several 12 V PSU’s. As you will understand I want to supply the L1 that I am selling with the original PSU. I can’t find any pictures of te original PSU on the internet. Can one of you please post a picture or a description of brand and model #? Your help will be greatly appreciated and I would like to conclude with commending Lumïn for their excellent support and for their ongoing investment in keeping the Lumïn players up with the latest developments. Kindest regards, Ewan.

? Peter, I removed the library, reconnected the L1 and loaded the library. Everything look good now. I sure hope I am out of the woods now. I will copy the reset instructions and save them somewhere safe.. Thanks, Ewan.

Hi Peter, I went through steps 1-9, nut the only option I get under the L1 tab is to remove the library. When I turn on remote access (the only other option available) I get the option to update. is this behavior a tell tale of what’s the matter? And what choice should I make. Kind regards, Ewan.

Hi Peter, I will follow the reset procedure first, I posed the questions nevertheless in case I need to reformat the L1. Thanks, I will keep you posted. Kind regards, Ewan.

Hi Peter, My working day had started, so I will perform the procedures you mentioned tonight. Before I do so, I would like to have your guidance on the following: I am using an Apple Macintosh as my desktop. If I want to reformat the L1, do I have to remove the Linux partition as well? In the last couple of days I also tried to see if the settings for the L1 in the Lumïn App (remote access and UpnP settings) made any difference. Are these important in relation to my problems, and what settings should I use? Regards, Ewan.

Hi Graig, I see I n your autograph that you have two L1 servers. Are both having the same problems? Ewan..

Hi Peter, i think my (our) problems must be related to the L1. My reasons for saying this is are twofold: 1.everything worked fine with my L1 until I reconnected the L1 after leaving it on the shelf for some time when I used the Qnap 2.the Qnap contains the very same files that are on the L1 and when I select Minimserver as my source everything is as it should be. One other observation: When I reload the library on the Qnap I get a pop up screen showing the progress. When I reload the library on the L1 there is no such pop-up screen. There seems to be no disk damage because the files are playing beautifully. I exclude WiFi issues as the culprit because both hard drives are wired to the same switch and I switch from one library to the other from the same iPad. Kindest regards, Ewan.

Hi Peter and Graig, A new observation: when playing an album that shows no cover art in either library view, the cover nevertheless appears in the top left corner. But not to stay..

Hi Peter, I tried everything you advised and more (removed the app and reinstalled it), but no luck. The behavior is erratic. The cover of eleven albums of the total of 320 is visible in list view, but not always in the tiled viewer. The library from the Qnap loads artwork without a problem. Also the app “hangs” regularly. Is there a way to check/reinstall thr firmware of the L1?

Hi Peter, I have a totally different question for you. Recently I am having problems with my L1. I didn’t use the L1 for some time because I used a Qnap NAS with Roon. When I reconnected the L1 It took ages to load the library to my S1, actually it never fully loaded at all. Also some of the icons (Qobuz and Radio) did not appear. To to determine the reason for this behavior moved all the music files from the L1 (I had some 1600 albums) and replaced the with a modest number of 300 albums. I never touched the system files. The music files loaded nicely, but after many hours the album art of only 4 albums is visible. The music files play fine. Can you please help me finding an explanation?

Ok, thanks, but the update is still compatible for the S1..

Hello Lee, I missed the S1 in your initial message. I trust you intended to include the S1?

Hi Peter, Then you will be right. I didn't have MQA files available at the time so I have no hands-on experience. I read in the Brinkmann manual that the Nyquist supports ROON as a ROON ready player and that it supports full MQA decoding. Assuming that the two work together was a leap of thought on my account.

Hi wklie, A few weeks ago I had a chance to listen to the Brinkmann Nyquist. If I am not mistaken this player supports MQA over RAAT. Actually this player persuaded me to install ROON on my NAS. Please core to me if I'm wrong..

Hi wklie, I imported the L2 files yesterday using Build 247. I suspect the problem lies in the specific L2 file. As you can see on the pic I added of the Roon screen during playback you can see that the audio file is shown as MAQ though it is not. Now that I have sorted this out I can start to evaluate the audible differences and determine my preference