ciccio1112

CIAO. Va bene anche la versione senza BMC. potresti usare realVNC per usare il tuo PC da remoto. puoi utilizzare un tablet, un laptop o anche uno smartphone.

Good morning. I also had problems showing the RAM, as SK8 says. You have to act on the screws by tightening them in the right way, because the CPU is certainly not aligned perfectly in the socket. Otherwise it happens that some modules are not seen correctly, and you may encounter the problems you mentioned.

HI MarcelNL, on the Asus c621 it is not necessary to disable any fans in the bios settings. You can easily work in fanless mode without doing anything.

The USB that Taiko Audio initially used before the release of their USB card, in my opinion, is excellent. While waiting for Emile to decide to market their USB card for DIY enthusiasts like us.

The motherboard features the ASMedia 3142 3.1 USB controller, which is the same as the one installed on the JCAT XE. Since a new firmware has recently been released for the JCAT XE, the question arises whether it’s possible to install the firmware on our Asus Sage, which surely has outdated firmware, dating back to when the motherboard was first introduced.

Good morning. Have any of you tried to update the firmware of the ASM 3142 USB controller of the Asus Sage C621 motherboard?

Hi MarcelNL is it possible to know something more about this amplifier? Costs, project scheme etc? Even in private. Thank you.

Bought from AliExpress.

Dopo poche ore posso dire di essere felice.🤩 La sensazione è più controllo della potenza, dinamica, e anche più trasparenza e risoluzione e siamo ancora all'inizio... Il basso molto più stretto, veloce e rilassato, più sensazione di ritmo. È quasi come se fosse tornato un bambino. incredibile cosa possono fare un alimentatore e una sorgente ben posizionati🔝. Grazie al produttore per questi fantastici induttori che hanno sostituito i miei Hammond. Grazie anche a MarcelML per averceli fatti scoprire. Attendo ulteriori conferme sia da parte mia che da parte vostra.

The no-load voltage is about 33V. Once my double xeon is connected, when starting up where there are high absorption peaks, the voltage drops to a minimum of 28.5V. Started Windows we are at about 31.5 - 32V. Later I'll start listening and breaking in the system. We hope there are major improvements. As for the hdplex case it manages to contain everything but in height it has been slightly raised to let the big Mundorf condenser enter.

Hi friends, we are almost ready…😜

HI. Check the perfect tightening of the bolts of the heatsinks that connect with the CPUs. It takes very little for all the contacts of the CPU not to touch correctly with the motherboard socket, and therefore not seen correctly.

Can I still order for two?

@ ciccio1112 Hi friends. Interessed For my V3 for replace my two Hammond 259ZJ. Shipping Italy. thanks.

Intanto questi sono il miei apparecchi finiti. Grazie a tutti e soprattutto a Nenon☺️