ale76

exactly my point :-)

yep , got that. What I am saying is that I connected my phone remotely using ARC app by opening a port on my firewall. No need to enable uPnP

I am no tech expert, but uPnP is not a must have for ARC. I manually opened the port I needed for the Core to see ARC and it works like a charm.

HiI have a Shanti feeding both USB bridge signature and Digione signature Could you remind me the connections please? I moved my system into a new room and did not take note of them By logic Inwould say it is 5v/3a to USB bridge and then 5v/1a to Digione, correct? thanks ale

Thanks!

HI, I have bought an Acrylic case to test the Digione signature on a RPI4. However, I get a very high temperature at 63.7℃ / 146.6℉ IS that normal?

All done, thank you very much for your help!

ahh...I see So I can detach the 2 boards? I thought the connectors were soldered

Thank you @Audio_Allo I did use the spacer as you said, but that is not fixing the issue. the 1.1mm spacer seems too short and will not touch the main board. Also, even with the 12mm mounted onthe front side the nut is still touching the board. Anything else I can try?

My apologies, I realized there is a section for cases I re-posted my question there

I could easily mount the Digione Signature and it works like a charm, however I am facing some issues with the case. THe "Clean Power" plug on the case is at the same height of the DIgione card, and it prevents the case from sealing. Same issues for the "clean power" connector, which is at the same height of the Ground screw. Seems like the Digione should be lifted by 3/5 millimeters. I tried all the different screws and spacers, but no one seems to do the job, because they lift the Digione too much. Any suggestion ? Maybe I have a defective case?

I received my Digione Signature and mounted on the USB Bridge using Ronn as a player (Roopie). It works, I can feed 2 different DACs simoultaneously, I see them as separate zones in Roon. The only issue I had is with the case, it is impossible for me to close it as the DIgione is touching the power plug. I have asked Allo directly to assist. Other than that, I can say I am enjoying more the sound from Digione Sig. rather than USB bridge sig., but I think that's due to the DAC I am using

@Audio_Allo good morning, I ordered received the Digione Signature so I could mount it on my USB Bridge signature, and of course I ordered the case as well. I could easily mount the Digione Signature and it works like a charm, however I am facing some issues with the case. THe "Clean Power" plug on the case is at the same height of the DIgione card, and it prevents the case from sealing. Same issues for the "clean power" connector, which is at the same height of the Ground screw. Seems like the Digione should be lifted by 3/5 millimeters. I tried all the different screws and spacers, but no one seems to do the job, because they lift the Digione too much. Any suggestion ? Maybe I have a defective case? Thanks for helping ALe

they get my highest recommendation if you are after something highly musical, I am really enjoying their products, and I think you can find great deals buying them used

hi @Boleary3 I own the USB Bridge signature, great streamer as you said, and I am planning to add the Digione signature on top of that. The reason is opposite to yours , because I think My DAC (an old one) has a better coax implementation. That said, , I'd like to understand if the Bridge/DIgione combo can feed 2 separate DACs simultaneously, one through Coax and the other through USB. Have you tried that by any chance ? Maybe @Audio_Allo can help answering ? thanks ale