bdasparis

Hi Jesus, I forgot this solution when describing the issue, you are right, but couldn't it be completely fixed ? I mean to have sms-100 recognizing DAC automatically without having to get a remote control and switch app to have DAC recognized ? I don't have this issue when using LMS on Raspbery Pi, and even more when using daphile on a computer : with this solution when I do switch DAC off daphile just pauseand restart by itself when the DAC is switch back on... And this feature is really confortable. Thanks

Hi Jesus, I have an issue with this sms-100, connected to a Cambridge MagicPlus : if I switch off the DAC and re-switch it on the sms-100 cannont recognize it even after a few mintets spent, so I have to unplug sms and replug it for it to recognize the DAC... What is quite annoying. I also noticed that sms-100 interface is very very slow before having DAC identified. See below sms-100 statuses, Is it due to this DAC in particular or is it a standard sms-100 behaviour ? Thanks for your answer, Regards 1. Connected to the DAC Statut de l’USB DAC (/proc/asound/card0/stream0): Cambridge Audio Cambridge Audio USB Audio 1.0 at usb-orion-ehci.0-1.1, full spe : USB Audio Playback: Status: Running Interface = 1 Altset = 1 Packet Size = 365 Momentary freq = 48000 Hz (0x30.0000) Feedback Format = 10.14 Interface 1 Altset 1 Format: S24_3LE Channels: 2 Endpoint: 1 OUT (ASYNC) Rates: 44100, 48000, 88200, 96000 Configuration matérielle du DAC USB (/proc/asound/card0/pcm0p/sub0/hw_params): access: RW_INTERLEAVED format: S24_3LE subformat: STD channels: 2 rate: 48000 (48000/1) period_size: 480 buffer_size: 1920 2. After having switched off and on the DAC Statut de l’USB DAC (/proc/asound/card0/stream0): Cambridge Audio Cambridge Audio USB Audio 1.0 at usb-orion-ehci.0-1.1, full spe : USB Audio Playback: Status: Stop Interface 1 Altset 1 Format: S24_3LE Channels: 2 Endpoint: 1 OUT (ASYNC) Rates: 44100, 48000, 88200, 96000 Configuration matérielle du DAC USB (/proc/asound/card0/pcm0p/sub0/hw_params): closed

Did work, Thank you Jesus

Hi Jesus, I was able to use Drive Mounter and read external USB drive attached to sms-100, but I discovered not knowing how that the drive is not readable anymore... So I went to Drive Mounter settings to check them and saw three "pre-defined" partitions when trying to select one under "Drive device name" : - /dev/sdb1/200 Mo - ext2 - /dev/sdb2 - 500M - swap - /dev/sdb3 - 4Go - ext4 My drive is a single NTFS partitioned drive... I also noticed there's some old information I keyed yesterday for test purpose that I can't erase from SMB settings, I tried to uninstall / reboot / re-install... With ne effect. Is there any option to blank all these crappy settings ? Thank you for your answer,