paulkouhan

thanks you, I had the heatsinks for some time in a box. I just added them to help keeping the chip cold !

Hi, My last iteration with 2 kemet A750 16V ( these are a bit smaler in diameter than the 25V) The caps helps to make the cable "stronger".

Several capacitor in parallel will reduce ESR !

Hi I ordered the Kemet 25V 560uF capacitor yesterday. I ordered also some 16V 560uF as well, they have a slightly better ESR.

I think the same concerning the distance. I don t understand why the use different cables for v+ and v- !

thank you ! I have some JANTZEN AUDIO HEW-PTFE Wiring cable Copper/Silver 1.3mm² I use to make speaker cables. I will try it this week end.

hi can you describe what cables you are using ? unshielded tripple ccc solid copper ? silver plated stranded copper ? thanks

My idea was to use 4 cables ?. One supra AND one Coax for v+ and the same for v- May be a bit complicated..

Hi, Cornan can you test the combo (supra + coax) for the v+ AND for the v- !? I like to have the same configuration on + and - wires. May be another good surprise...

Hi, No all my devices are powered in a "traditionnal" way. Earth ground is used only for shileding cables. I still have 2 SMPS that power my full digital amps. I plan to try some linear power supply or to plug the SMPS on a totally different power line.

Sorry I do not know what is jsgt.. You can pick the earth on any Ac plug and bring a wire to the shielding ?

I have may be one thing different in the Supra DAC DC Cable. I have the drain loop cable connected to the ground on the LPS side ! (the earth ground not the V-) Cornan, can you try it ? I think it is slightly better than just the loop. I did not put any capacitor, is it an improvement ?

Hi, I made the same cables as you !! Thank you for sharing it. It is awsome. I had some silver plated DC cables, then SUPRA CAT 8, and finally the SUPRA DAC. Just the facts : there is an audible amelioration. A friend of mine came today, I told him Iwill make some changes, without telling him what I will do. From CAT 8 to 20 AWG silver plated, he found the sound not as good. Back to CAT 8, he found the sound better. Then to SUPRA DAC, he found the sound better again. It is very simple to ABX. Corman please share your next findings !!

I just get the iso regen yesterday. Definitely some big improvements in my system ! Thanks Alex for this great piece of gear. I powered it first with the supra cat 8 cable at 5v with a lt3045 board. It is followed by a singxer F1 a nano digi and some fx d802 full digital tweaked (2 x lt3045 on board !) amplifiers. Is that a correct way to power it ? Amyway it works fine ! Later in the day I made one supra Dac cable as described before. The sound is awsome ! I cannot say yet if the change of the dc cable is part of that. I will have to make some serious listenings.

Hi, After 1 big hour of work, I finnaly have my 5 supra cat 8 power cables ! The aviator plug has the shield connected to the ground. So I think it is a true Faraday cage. I suggest the use of a good stripping plier, Like a Facom 793936 I did not have time yet try them...