bmrcc

Thanks Jesus. Right after this update procedure, 88.2 appears on Mytek. However there is now another problem. The streaming does not play to Mytek. Mytek shows 88.2 always and cannot sync (Mytek "internal sync") any song. I have tried minimserver with Kinsky control, as well as Audiostation from NAS, the player just briefly showed the "play" sign then "stop". I have also tried another USB DAC (hiface2) which is the same problem. In microRendu setup, i have confirmed MPD/DLNA mode. Mytek version is the latest v1.8.3 DAC Diagnostics USB output DAC description: Mytek Stereo192-DSD USB2 Diagnostic information for this DAC UNKNOWN Status: Unknown (status not available when device is not playing) Custom DAC settings DAC name Special DAC Name of the custom DAC DAC audio device hw:0,0 Audio device for this DAC (from the list below) ex. hw:0,0 Audio device list 0) Digital alsa audio output interface `hw:0,0' - device name = Mytek Stereo192-DSD USB2 - interface name = Mytek USB2 - usb audio class = (n/a) - character device = /dev/snd/pcmC0D0p - encoding formats = S24_LE, S32_LE - monitor file = /proc/asound/card0/pcm0p/sub0/hw_params - stream file = (n/a) Have i done this new SW update correctly? BTW, another question, for dsf/dff streaming from minimserver, should i put dff:dopwav and dsf:dopwav in minimserver setting? Because i recall that it was not very successful to play it through DLNA to microRendu which is set also with DoP to Mytek before. Thanks for your help again.

No it did not work. Tried different power sequences too. I also suspected my USB cable but changed to the hard adapter still no 88.2 show up. But other USB DAC works fine after that software update done in microRendu. The update says "complete". What else can I check to make this Mytek 192 DSD DAC recognized (this device seems more complication in power up steps than other DAC USB plug in. I followed the "Known issues" with microRendu)? Anything recommended me to do in the Custom DAC settings? Thanks in advance for your kind feedback.

Hi Jesus, After software update, Mytek 192 DSD DAC USB2.0 cannot be found again. I did try power cycle the Mytek and reboot the microRendu. So Mytek is powered ON when the microRendu boots up. It was working fine with Mytek USB 2.0 before the software update. Current SW version is still showing V2.1 and "nothing to do" now when I choose to update microRendu again and then "Back to main menu". Could you please advice if anything related to this software update action? DAC Diagnostics No audio devices found. Attach a USB DAC to this system. System settings – Custom DAC Audio device list Error in alsa-capabilities (v0.9.1): aplay did not find any soundcard.

Wonderful !! It works just by following your advice. USB2.0 is seen with 88.2 after uRendu is rebooted. Play now with 192kHz as well as DSD. Thank you so much [emoji1]

Hi Jesus, I am using Mytek 192 DSD DAC and now setting up my new uRendu. However, uRendu does not recognize USB2.0 of Mytek 192 DSD DAC. Only USB1.1 can be recognized. I also check that is the situation with the DAC diagnostics. That means uRendu can only play up to 96kHz with Mytek 192 DSD DAC on USB 1.1? Could you tell if uRendu can support Mytek 192 DSD DAC on USB2.0 for 192kHz and DSD? Thanks.

Thanks for the good news. Order placed.

i have got the same problem of loud white noise along with the music during DSD playing. Tried both Firewire and USB 2.0 with Audirvana but no luck. The display shows "dsd" and i guess Native DSD is detected. Mytek firmware updated 1.7.5 Audirvana+ 1.5.6 Macbook OS.X 10.6.8 Firewire driver 4.1.3 USB driver 2.00.11 Selected Automatic Detection for Native DSD capability and it shows "DSD over PCM standard 1.0" in the debug info. If selecting dCS Scheme 1, no sound output. Checked Exclusive access, Direct Mode and Integer mode. Thanks in advance for help.