Is this what you need:
Profile: Profile not Setting
RamSystem: Ramsystem not enabled
Free memory: 7649MB of total 8053MB
Kernel: 6.1.62-GentooPlayer-ST+
───────────────────────────────────────
GentooPlayer | 16:25 | Fri 22/12/23
───────────────────────────────────────
v8.40-186 | Raspberry Pi 5B (aarch64)
───────────────────────────────────────
wlan0 | 192.168.1.213
───────────────────────────────────────
Players/soft. Info:
Squeezelite-R2 [Disabled]
Squeezelite [Disabled]
Networkaudiod [Disabled]
LogitechMediaServer [Disabled]
BubbleUpnp [Disabled]
HQPlayer Embedded [Enabled]
Mpd [Disabled]
UpMpdCli [Disabled]
RoonBridge [Disabled]
RoonServer [Disabled]
myMPD [Disabled]
minimserver [Disabled]
shairport-sync [Disabled]
spotify-connect [Disabled]
web-interface [Enabled]
Samba [Disabled]
gmediarender [Disabled]
camillagui [Disabled]
aplayer [Disabled]
aprenderer [Disabled]
gstreciver [Disabled]
GP-Service Info:
gpchronystop [Enabled]
gphavagedstop [Enabled]
gpireteonline [Enabled]
gpkernel1 [Enabled]
gprtclock [Enabled]
gpsetrestart [Enabled]
Started Service:
wpa_supplicant
dhcpcd
chronyd
net.wlan0
netmount
hqplayerd
sysftw
local
Stopped Service:
gpkernel1
gprtclock
gphavagedstop
gpchronystop
gpireteonline
gpsetrestart
Crashed Service:
─────────────────────────────────────────────────────
Boot Options:
dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=0367e6cd-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait net.ifnames=0
─────────────────────────────────────────────────────
*** Scanning for playback devices ***
Card 0, ID `D2Qute', name `2Qute'
Device 0, ID `USB Audio', name `USB Audio', 1 subdevices (0 available)
Error opening sound device for card 0, device 0: Device or resource busy. Skipping.
─────────────────────────────────────────────────────
AUDIO CARDS INFO:
CARD TYPE ADDRESS NAME
--------------------------------------------------------------------------------------------------------
card0 USB Audio card usb3 --> 245f:1213 Chord Electronics Ltd
card0 STATUS --> no setup
--------------------------------------------------------------------------------------------------------
USER PID ACCESS COMMAND
/dev/snd/controlC0: root 2087 F.... hqplayerd
/dev/snd/pcmC0D0p: root 2087 F.... hqplayerd
--------------------------------------------------------------------------------------------------------
─────────────────────────────────────────────────────
K-d8:3a:dd:a5:5b:95 d8:3a:dd:a5:5b:97
─────────────────────────────────────────────────────
─────────────────────────────────────────────────────
Filesystem Type Size Used Avail Use% Mounted on
/dev/root ext4 57G 5.4G 50G 10% /
devtmpfs devtmpfs 10M 0 10M 0% /dev
tmpfs tmpfs 1.6G 2.7M 1.6G 1% /run
shm tmpfs 4.0G 16K 4.0G 1% /dev/shm
/dev/sda1 exfat 932G 928G 4.1G 100% /media/Music
/dev/mmcblk0p1 vfat 591M 288M 304M 49% /boot
─────────────────────────────────────────────────────
Raspberry Pi 5 Model B Rev 1.0
CPU(s): 4
On-line CPU(s) list: 0-3
CPU(s) scaling MHz: 100%
Thread(s) per core: 1
Vendor ID: ARM
Model: 1
Model name: Cortex-A76
─────────────────────────────────────────────────────
CPU-specific microarchitecture:
─────────────────────────────────────────────────────
Gentooplayer CPU Info
Use cpu-governor to change CPU / performance options
─────────────────────────────────────────────────────
Architecture | aarch64
Temp | 47'c : 116'f | Optimal.
Governor | performance
Current Freq Min Freq Max Freq
CPU0 | 2400 MHz 1000 MHz 2400 MHz
CPU1 | 2400 MHz 1000 MHz 2400 MHz
CPU2 | 2400 MHz 1000 MHz 2400 MHz
CPU3 | 2400 MHz 1000 MHz 2400 MHz
─────────────────────────────────────────────────────
COMMAND %CPU
hqplayerd 4.4
kworker/u8:0-ev 0.8
systemd-udevd 0.2
init 0.1
kworker/2:1-eve 0.1
